Darkglass Infinity 500 Combo 210 Digital Bass Combo
Additional Photos:
Product Videos :
Related Products
Description
Powerful Tone Shaping
A 5-band graphic EQ, dynamic compression, and multiple overdrive engines (including B3K, Alpha-Omega, and Vintage Microtubes) give bassists full tonal control - from subtle warmth to modern edge.
Suite Integration
Built-in USB-C and Bluetooth let you manage presets, load impulse responses, and update firmware through the Darkglass Suite on desktop or mobile. The Infinity 500 Combo comes preloaded with five versatile factory presets and seven IRs. The Darkglass Suite unlocks the full potential of the Infinity Combo by providing access to additional IRs, settings and preset management.
Pro-grade Output Flexibility
With Pre/Post DI, Line Out, headphone out with cab sim, and speaker extension, the Infinity 500 is stage-, studio-, and practice-ready straight out of the box.
Features
• 500W 2x10 digital combo amplifier
• Darkglass VMT, B3K, and Alpha Omega drive voices
• Sub octave with filter and blend
• Compressor with adjustable position (pre/post drive)
• Graphic EQ tuned for bass frequencies
• Pre/post XLR DI, line out, and headphone outputs
Specifications
• Fully digital audio processing
• 500 watt amplifier, voltage selector for 100-120 /200-240 VAC, 50-60 Hz
- 1/4" instrument input
- Input impedance: 1 MΩ
- Maximum input level at minimum gain before clipping: 19.4 dBu (7.25 Vrms)
• Input gain potentiometer
- 40 dB of gain
• Eight digitally read push-pots
• Six digitally read sliders
• USB-C
Audio interface
- 4 input channels and 6 output channels
- 48 kHz or 44.1 kHz sample rate
MIDI in
• Bluetooth (BLE and A2DP)
• MIDI input
- 7-pin DIN connector only with Darkglass MIDI footswitch
- 5-pin DIN connector with other MIDI equipment
• Effects loop
- Maximum send level before clipping: 12.8 dBu (3.4 Vrms)
- Maximum return level before clipping: 13.3 dBu (3.6 Vrms)
• Headphone output
Maximum output level before clipping:
- 33 Ω load: 4.5 dBu (1.3 Vrms)
- 120 Ω load: 12.6 dBu (3.3 Vrms)
Output impedance: < 1 Ω
• Speaker output
- speakON / 1/4" combo jack
- Minimum load impedance: 8 Ω
• Two XLR direct outs, unaffected by master volume
- Maximum output level before clipping: 3.0 dBu (1.1 Vrms)
• Line in
- Maximum input level before clipping: 20.3 dBu (8 Vrms)
• Line out, unaffected by master volume
- Maximum output level before clipping: 20.5 dBu (8.2 Vrms)
• 6-string bass tuner, notes B, E, A, D, G and C between A0 and A#5
• Fan cooling, 1600 to 3800 RPM
• Woofers: Custom Design Eminence® Speaker
• Horn: WGS-410
• Power Rating: 500 Watts
• Dimensions (W x H x D): 46.4 x 61.1 x 39.5 cm (18.2" x 24" x 15.5")
• Weight: 17.3 kg / 38.13 lb
Media
Q & A
Reviews

Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

