Voodoo Lab Amp Selector PRO Isolated Output Switch/Blend Programmable with MIDI Amp Selector PRO Isolated Output Switch/Blend Programmable with MIDI
Additional Photos:
Related Products
Description
Common passive ABY boxes load down your pickups, allow ground hum, and make switching noisy. Amp Selector PRO is an active guitar amp switcher that solves all of these problems with four transformer-isolated outputs, letting you send your guitar's signal to multiple destinations without compromise. Run quad amp setups, combine tube amps with modelers and recording inputs, capture DI signals for reamping - whatever your rig demands. Plus, programmable presets and MIDI control let you save your exact routing for instant recall.
Premium Transformers for Superior Sound
Featuring four custom nickel-core transformers, Amp Selector PRO delivers exceptional frequency response and clarity that standard transformers can't match. The high-inductance permalloy design enhances your tone, preserving low-end punch and high-frequency detail, so your sound stays full and dynamic. Plus, independent ground lift switches on each output let you instantly kill the gnarly noise that's common with multi-amp setups.
Keep Your Tone Pure
Running multiple amps with passive switchers or long cables robs your signal of highs and presence. Amp Selector PRO's studio-quality buffer is built around the Texas Instruments LME49720, an elite audio op-amp with vanishingly low noise and exceptional clarity so your tone stays pure from input to output.
Switch Without Pop
Voodoo Lab Quiet Switching™ - using proprietary JFET and zero-crossing technology - delivers silent operation for smooth transitions, whether you're toggling between two amps or four.
Fix Phase and Balance Easily
When your multi-amp rig is out of phase, it sounds hollow and thin. Amp Selector PRO's programmable phase invert lets you set polarity on each output to restore your tone. Plus, quickly balance or blend amps with independent level controls.
Programmable Presets with MIDI Control
Using Amp Selector PRO with your MIDI-controlled rig allows you to switch amps along with your other MIDI devices.
Features
• Connect to amps, modelers, and your DAW with stunning fidelity• Enjoy noise-free, full-bandwidth tone using studio-grade transformers and ground lifts
• Preserve your tone with transparent buffer and silent switching
• Balance any setup using independent level controls and selectable phase invert
• Store and recall user presets instantly via MIDI
Specifications
- Four isolated outputs with independent level controls and ground lifts- Studio-grade nickel-core isolation transformers on each output
- Ultra-transparent audio buffer
- Voodoo Lab Quiet Switching™
- Selectable phase invert control for every output
- Programmable user presets with MIDI control
- Thru output for tuner, DI, or DAW reamping
- Powers from any isolated 9VDC output
- Dimensions: 11" wide x 3.75" deep x 1.38" tall (280 x 96 x 35 mm)
- Weight: 1.3 lbs. (0.6 kg)
- 5-year warranty
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Amp Selector PRO Isolated Output Switch/Blend Programmable with MIDI | 845451 |
