Opens in a new window
Behringer UV1 Audiophile Mic Preamplifier/Voice Processor Audio Interface UV1 Audiophile Mic Preamplifier/Voice Processor Audio Interface
Additional Photos:
Related Products
Description
When it comes to vocals, sound engineers become critical and often prefer a channel strip over a mixing console because of its outstanding sound quality and flexibility. The ULTRAVOICE UV1 is a full-featured channel strip with high-end microphone preamplifier, versatile sound processing features, and the free choice to play out the processed sound via balanced analog outputs or pass it on to the internal USB interface.
Midas Mic Preamp - Legend Inside!
Did you know that Midas is one of the most recognized brands used by audio professionals around the world? Now you can get the gear the pros use! ULTRAVOICE UV1 comes with a state-of-the-art Midas microphone preamplifier with +48 V phantom power, ultra-low noise, high gain and audiophile quality.
Crystal Clear Signal Path at 192 kHz
The ULTRAVOICE UV1 is more than just a mic preamp and voice processor - we added one of the best USB audio interfaces with the highest possible resolution and lowest latency. Full 192 kHz sampling rate at a clear 24-bit resolution will make you smile listening to the astonishingly crisp sound you'll get.
Zero Latency Monitoring
Recording the voice is one of the most critical tasks in the studio. Singers are very sensitive to delays. A few milliseconds can make all the difference between a good or a great take! So, we added this simple but very effective monitoring section to the ULTRAVOICE UV1. Blend between direct input signal and USB playback makes it easy to find the best balance while you're recording. Just plug in your headphones and adjust the volume.
Digital or Analog? - Both!
Some people prefer to stay in the analog domain, some prefer the shorter path to record directly to the digital. On the ULTRAVOICE UV1 you will get both - simultaneously! Connect your PC or Mac directly via USB to get the best vocal sound without detours into your DAW. Connect any analog outboard equipment to the balanced outputs for further signal flow. It's up to you.
Sound P-R-O-C-E-S-S-I-N-G
A high-quality microphone preamp and a brilliant USB interface are the most important tools to integrate vocals perfectly into a song arrangement. Just press the BYPASS switch to get the pure experience. But sometimes you want to pimp your vocals for the best result. And here we go! The ULTRAVOICE UV1 features all kind of processing you will need - a Compressor for more punch, a De-Esser to remove sibilants, an Enhancer for dynamic sound details at the lower and upper end of the frequency spectrum, an Expander/Gate to "mute" automatically unwanted surrounding noise and finally the amp to gain lost levels again. And even if this would be not enough you can insert additional outboard gear for even more sound improvements.
Stage - Studio - Stream
It doesn't matter what your target application is. The ULTRAVOICE UV1 is a perfect match for any environment where the best quality for your voice as a singer, narrator, moderator will be required. Put it in a live rack to go on tour, install it in a musical theater for the main artists, make it the center of your home studio or broadcast streaming environment, or unload your mixing console at the recording studio. The ULTRAVOICE UV1 is the ideal solution for home or professional studios, or as part of a larger setup, on stage or on tour. Premium, ultra-low noise components and high headroom lets your music shine at its best this is especially true for the most critical source: Vocals!
High Quality, Best Value
We designed the ULTRAVOICE UV1 to provide many years of super-clean, high-fidelity performance in the most critical listening environment - yours! Built from the highest-grade components, the UV1 is the perfect way to add a lot more convenience and control into your current studio setup.
• Perfectly matches your studio, live and pro recording environment
• High-quality mic processor allows you to optimize your recordings
• Audiophile 192 kHz USB audio interface to connect directly to your computer
• Effective De-esser for quick removal of excessive sibilance from your vocal track
• Integrated dynamic Enhancer adds high frequencies, lost through compression
• True RMS expander for extremely smooth noise reduction
• Send and Return connectors allow you to add external processors
• Input/playback mix control to balance between direct monitor and USB playback signal
• Accurate LED metering for level and processing indication
• Illuminated switches ensure perfect operation in dark stage and studio environments
• Internal switch-mode power supply (100 - 240 V) for noise-free audio and low power consumption
- Line in: 1/4" TRS, balanced Impedance: 10 kΩ unbalanced, 20 kΩ balanced Max input level: 30 dBu
- Insert return: 1/4" TRS, balanced Impedance: 5 kΩ Max input level: +21 dBu
- Line out: Balanced XLR, 1/4" TRS Impedance: 100 Ω unbalanced, 200 Ω balanced Max output level: +20 dBu
- Insert send: 1/4" TRS, balanced Impedance: 100 Ω unbalanced Max output level: +20 dBu
- Mic preamp: Gain: Mic: 0 to +60 dB, line: -15 to +45 dB 48 V: +48 V phantom power, switchable Low cut: -18 dB/oct @ 80 Hz
- Compressor: Drive: Threshold, -40 dB to +20 dB Density: 1 to 75 dB/sec
- De-Esser: Frequency: 800 Hz to 10 kHz Threshold: Program-dependent Release time: Program-dependent, approx. 1 ms/dB
- Enhancer: LF/HF detail: Min to max boost (0 dB to +12 dB)
- Expander/Gate: Threshold: Off to +15 dB Ratio: 1:1 to 10:1
- Output: Output gain: -30 to +10 dB
- Monitor: Mix: Blend direct signal and playback, Level: 0 to +6 dB
- Frequency response: 10 Hz to 80 kHz (0/-3 dB)
- Dynamic range: 110 dB, A-weighted
- Type: USB 2.0, type B
- Interface: 2 in / 2 out
- Converter: 24-bit
- Sample rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
- Supported operating systems: Windows 10 / Mac OS X 10.4 or higher
- Switch-mode autorange power supply: 100-240 V, 50/60 Hz
- Power consumption: 15 W
- Mains connection: Standard IEC connector
- Standard operating temperature range: 5° C - 45° C (41° F - 113° F)
- Dimensions: 483 x 150 x 44 mm (19 x 5.9 x 1.7")
- Weight: 1.5 kg (3.3 lbs)
Midas Mic Preamp - Legend Inside!
Did you know that Midas is one of the most recognized brands used by audio professionals around the world? Now you can get the gear the pros use! ULTRAVOICE UV1 comes with a state-of-the-art Midas microphone preamplifier with +48 V phantom power, ultra-low noise, high gain and audiophile quality.
Crystal Clear Signal Path at 192 kHz
The ULTRAVOICE UV1 is more than just a mic preamp and voice processor - we added one of the best USB audio interfaces with the highest possible resolution and lowest latency. Full 192 kHz sampling rate at a clear 24-bit resolution will make you smile listening to the astonishingly crisp sound you'll get.
Zero Latency Monitoring
Recording the voice is one of the most critical tasks in the studio. Singers are very sensitive to delays. A few milliseconds can make all the difference between a good or a great take! So, we added this simple but very effective monitoring section to the ULTRAVOICE UV1. Blend between direct input signal and USB playback makes it easy to find the best balance while you're recording. Just plug in your headphones and adjust the volume.
Digital or Analog? - Both!
Some people prefer to stay in the analog domain, some prefer the shorter path to record directly to the digital. On the ULTRAVOICE UV1 you will get both - simultaneously! Connect your PC or Mac directly via USB to get the best vocal sound without detours into your DAW. Connect any analog outboard equipment to the balanced outputs for further signal flow. It's up to you.
Sound P-R-O-C-E-S-S-I-N-G
A high-quality microphone preamp and a brilliant USB interface are the most important tools to integrate vocals perfectly into a song arrangement. Just press the BYPASS switch to get the pure experience. But sometimes you want to pimp your vocals for the best result. And here we go! The ULTRAVOICE UV1 features all kind of processing you will need - a Compressor for more punch, a De-Esser to remove sibilants, an Enhancer for dynamic sound details at the lower and upper end of the frequency spectrum, an Expander/Gate to "mute" automatically unwanted surrounding noise and finally the amp to gain lost levels again. And even if this would be not enough you can insert additional outboard gear for even more sound improvements.
Stage - Studio - Stream
It doesn't matter what your target application is. The ULTRAVOICE UV1 is a perfect match for any environment where the best quality for your voice as a singer, narrator, moderator will be required. Put it in a live rack to go on tour, install it in a musical theater for the main artists, make it the center of your home studio or broadcast streaming environment, or unload your mixing console at the recording studio. The ULTRAVOICE UV1 is the ideal solution for home or professional studios, or as part of a larger setup, on stage or on tour. Premium, ultra-low noise components and high headroom lets your music shine at its best this is especially true for the most critical source: Vocals!
High Quality, Best Value
We designed the ULTRAVOICE UV1 to provide many years of super-clean, high-fidelity performance in the most critical listening environment - yours! Built from the highest-grade components, the UV1 is the perfect way to add a lot more convenience and control into your current studio setup.
Features
• Pristine Midas-designed preamplifier for all microphone and line-level sources• Perfectly matches your studio, live and pro recording environment
• High-quality mic processor allows you to optimize your recordings
• Audiophile 192 kHz USB audio interface to connect directly to your computer
• Effective De-esser for quick removal of excessive sibilance from your vocal track
• Integrated dynamic Enhancer adds high frequencies, lost through compression
• True RMS expander for extremely smooth noise reduction
• Send and Return connectors allow you to add external processors
• Input/playback mix control to balance between direct monitor and USB playback signal
• Accurate LED metering for level and processing indication
• Illuminated switches ensure perfect operation in dark stage and studio environments
• Internal switch-mode power supply (100 - 240 V) for noise-free audio and low power consumption
Specifications
- Mic input: Discrete mic preamp Type: Balanced XLR/TRS combo connector Impedance: 4 kΩ Max input level: +17 dBu Equivalent input noise (EIN): -126 dBu, 20 Hz - 20 kHz, 150 Ω- Line in: 1/4" TRS, balanced Impedance: 10 kΩ unbalanced, 20 kΩ balanced Max input level: 30 dBu
- Insert return: 1/4" TRS, balanced Impedance: 5 kΩ Max input level: +21 dBu
- Line out: Balanced XLR, 1/4" TRS Impedance: 100 Ω unbalanced, 200 Ω balanced Max output level: +20 dBu
- Insert send: 1/4" TRS, balanced Impedance: 100 Ω unbalanced Max output level: +20 dBu
- Mic preamp: Gain: Mic: 0 to +60 dB, line: -15 to +45 dB 48 V: +48 V phantom power, switchable Low cut: -18 dB/oct @ 80 Hz
- Compressor: Drive: Threshold, -40 dB to +20 dB Density: 1 to 75 dB/sec
- De-Esser: Frequency: 800 Hz to 10 kHz Threshold: Program-dependent Release time: Program-dependent, approx. 1 ms/dB
- Enhancer: LF/HF detail: Min to max boost (0 dB to +12 dB)
- Expander/Gate: Threshold: Off to +15 dB Ratio: 1:1 to 10:1
- Output: Output gain: -30 to +10 dB
- Monitor: Mix: Blend direct signal and playback, Level: 0 to +6 dB
- Frequency response: 10 Hz to 80 kHz (0/-3 dB)
- Dynamic range: 110 dB, A-weighted
- Type: USB 2.0, type B
- Interface: 2 in / 2 out
- Converter: 24-bit
- Sample rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
- Supported operating systems: Windows 10 / Mac OS X 10.4 or higher
- Switch-mode autorange power supply: 100-240 V, 50/60 Hz
- Power consumption: 15 W
- Mains connection: Standard IEC connector
- Standard operating temperature range: 5° C - 45° C (41° F - 113° F)
- Dimensions: 483 x 150 x 44 mm (19 x 5.9 x 1.7")
- Weight: 1.5 kg (3.3 lbs)
Q & A
There are currently no questions for this product.
Reviews
There are currently no reviews for this product. Be the first to write one!
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| UV1 Audiophile Mic Preamplifier/Voice Processor Audio Interface | 846122 |
