Rupert Neve Designs 5022 Dual Mic Pre with Silk 5022 Dual Mic Pre with Silk
Additional Photos:
Related Products
Description
Building upon the great success of the Rupert Neve Designs 5088 Console, a large-format, Class-A discrete tracking & mixing solution for the most discerning audio professionals, the 5022 was designed to maximize the amount of inputs available in one 5088 Penthouse Module by providing two class-A, electronically balanced mic preamps, 2 variable high pass filters, and a variable Silk / Texture control for each input channel.
Designed to the same +/- 24V power spec as the 5051, 5052, and 5053 Penthouse Modules, the 5022 can populate an entire 5088 console or be mixed and matched with other Penthouse Modules to provide a versatile combination of flavors suitable for literally any source.
The Mic Preamps
Starting with the very first Portico Series of Mic Preamps, Rupert Neve Designs has been on a quest to design an incredibly low noise, high gain, wide bandwidth class-A input stage that is electronically balanced to faithfully reproduce the essence of the source. The dual Mic Preamps in the new 5022 Penthouse Module are the pinnacle of this design, a result of over 18 years of painstaking R&D.
The 5022 also includes Neve's variable high pass filter with a range from 20 Hz - 250 Hz, plus polarity reverse and 48V phantom power switches.
Transformer Output with Silk & Texture Controls
The custom RND output transformer in the 5022 features the Silk Red / Blue and Texture controls to precisely tailor the harmonic content and tonality of the output stage. Pushing the Silk button cycles the Silk modes from Red to Blue to OFF. The SILK Texture control adds harmonic content as the texture value is increased. Red Silk accentuates the musical harmonic saturation in the mid and high frequencies, while Blue Silk accentuates harmonics in the low and low-mid frequencies.
By manipulating the Texture control, the amount of Silk can be changed from essentially absent, to roughly 4-5% THD (mostly second order) depending on how hard the output transformer is being driven. This gives 5022 users total control over dialing in a classic, vintage or modern sound.
Specifications
MIC PRE
Input Impedance- 2200 ohms
Frequency response
- 30dB gain, +4dBu out, 150-ohm source impedance
- +/-0.2dB, below 5Hz-50kHz
Noise 22Hz-22kHz
- @ unity: -101dBu
- @ 30 dB gain: -94dBu
- @ 66dB gain: -61dBu
EIN 22Hz-22kHz, unweighted
- @ 30dB gain, -124dBu
Maximum input level
- +24dBu @ 1kHz
- +6dBu, 22Hz-22kHz
THD + Noise, 1kHz @+4dBu out w/30dB Gain
- 0.002% typical
LINE INPUT
Input Impedance- 10 kohms
Frequency Response
- +/- 0.1dB, 16Hz-34kHz
- +/-0.5dB, 7Hz-90kHz
Noise 22Hz -22kHz
- -102dBu
Maximum input level @ 1kHz
- +26.3dBu
THD + Noise, 1kHz @+4dBu
- Better than 0.002% typical
EQ
High Frequency- +/- 15dB, center frequency selectable 8kHz / 16kHz
- Selectable peak/shelf modes
Inductor based Mid Frequency
- +/-15dB, center frequency selectable 200Hz, 350Hz, 700Hz, 1.5kHz, 3kHz, 6kHz (+/-10%)
- Mid Hi Q selectable option
Low Frequency
- +/- 15dB, center frequency selectable 35Hz, 60Hz, 100Hz, 220Hz
- Selectable peak/shelf modes
Output Stage Silk Mode
- Selectable RED/BLUE Silk modes
- Continuously variable Silk Texture control
Dimensions
- 1.75 x 8.75 x 9.4" (4.5 x 22.2 x 23.9 cm)
Weight
- 3.5 lbs. (1.6 kg)
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| 5022 Dual Mic Pre with Silk | 846928 |
