Roland Super UA USB Audio Interface
Additional Photos:
Great Additions
Description
The Super UA combines audiophile sound, premium build quality and low latency performance in a next-generation audio interface for Mac and PC. With native support for both 1-bit DSD and 32-bit PCM playback, the Super UA is the state-of-the-art in fidelity. Low-latency drivers deliver smooth and efficient performance with your favorite DAW. Its modular design, sculpted controls, and all-metal construction make it a pleasure to use and beautiful to behold.
SYSTEM
Number of Audio Playback Channels
PCM format: 6 channels, 2 channels
DSD format: 2 channels
Number of Audio Record Channels
PCM format: 2 channels
*You cannot record in DSD format.
Signal Processing
[PCM format]
PC interface: 32 bits
DA Conversion: 1 bit, 32 bits
AD Conversion: 24 bit
• When "D/A Conversion = 1 bit" is valid, DA conversion operates on 1 bit.
[DSD format]
PC interface: 1 bit
DA Conversion: 1 bit
Sampling Rate
[PCM format]
- PC interface: 352.8 kHz, 192 kHz, 176.4 kHz, 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz
- DA Conversion: 3.072 MHz, 2.8224 MHz, 192 kHz, 176.4 kHz
- AD Conversion: 192 kHz, 176.4 kHz
*If the sampling rate is 352.8 kHz, the number of channels is limited to two channels, and playback is possible only via ASIO/Core Audio.
*When "D/A Conversion = 1 bit" is valid, DA conversion operates on 3.072 MHz or 2.8224 MHz.
[DSD format]
- PC interface: 5.6448 MHz, 2.8224 MHz *
- DA Conversion: 2.8224 MHz
*5.6448 MHz DSD data is down-converted to 2.8224 MHz for playback.
DSD Format Playback Method
DoP version 1.0
Interface
Hi-Speed USB
Connectors
[Main unit]
- PHONES jack: Stereo miniature phone type, Stereo 1/4-inch phone type
- LINE OUT A jack: Stereo 1/4-inch phone type, balanced
- I/O connector (Breakout Box)
- USB port: USB Type micro B
- DC IN connector
[Breakout box]
- LINE OUT B jack: XLR type, balanced
- MIC 1 jack, MIC 2 jack: XLR type, balanced, phantom power (DC 48 V, 10 mA Max)
*Current value per channel.
Controller
MIC 1 button, MIC 2 button, LINE IN button, PHONES button, A button, B button
Volume dial
Indicators
- Level indicator
- Volume indicator
- 48V indicator
Characteristics
Nominal Input Level
- LINE IN jack (1/4-inch TRS phone type): -28 +4dBu
- MIC 1 jack, MIC 2 jack (XLR type): -60 -2 dBu
Nominal Output Level
- LINE OUT A jack (balanced): +4 dBu
- LINE OUT B jack (balanced): +4 dBu
- PHONES jack: -2 dBu
Maximum Output Level
- LINE OUT A jack (balanced): +22 dBu
- LINE OUT B jack (balanced): +22 dBu
- PHONES jack: +16 dBu
PHONES Maximum Output Power
- 200 mW + 200 mW (L + R, 40 ohms)
- 65 mW + 65 mW (L + R, 300 ohms)
Headroom
18 dB
Input Impedance
- LINE IN jack (1/4-inch TRS phone type): 12 k ohms (balanced)
- MIC 1 jack, MIC 2 jack (XLR type): 6.8 k ohms (balanced)
Output Impedance
- LINE OUT A jack: 600 ohms (balanced)
- LINE OUT B jack: 600 ohms (balanced)
- PHONES jack: 30 ohms
Frequency Response:
- 192.0 kHz: 20 Hz60 kHz (+0/-1 dB), 20 Hz90 kHz (+0/-5 dB)
- 176.4 kHz: 20 Hz60 kHz (+0/-1 dB), 20 Hz80 kHz (+0/-5 dB)
- 96.0 kHz: 20 Hz44 kHz (+0/-0.5 dB)
- 88.2 kHz: 20 Hz40 kHz (+0/-0.5 dB)
- 48.0 kHz: 20 Hz22 kHz (+0/-0.5 dB)
- 44.1 kHz: 20 Hz20 kHz (+0/-0.5 dB)
Residual Noise Level
- LINE IN to LINE OUT A: -96 dBu typ. (SENS: min., 1 k ohms terminated, IHF-A)
*Internal Direct Monitor Mixer setting
- INPUT level: 0 dB
Dynamic Range
[AD block]
LINE IN: 112 dB typ. (SENS: min.)
MIC 1, MIC 2: 111 dB typ. (SENS: min.)
[DA block]
LINE OUT A, LINE OUT B: 118 dB typ.
OTHER
Power Supply
AC Adaptor
Current Draw
1,000 mA
Accessories
- Owner's Manual
- Leaflet "USING THE UNIT SAFELY"
- AC adaptor
- USB cable (1 m, 3-1/3 inches)
Q & A
Reviews

Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

