Mesa Boogie Lampe préamplificateur SPAX7

UGS: # 60249   |   Modèle: # 750151F   |    Product Reviews4 Avis  Écrire une critique

Lampe préamplificateur SPAX7
Avisez-moi

Achetez en ligne

 Ajouter au panier

Achetez en succursale


Complétez votre achat



Description


Les lampes de préamplification MESA SPAX7 sont des 12AX7 de qualité supérieure qui possèdent un niveau de performance globale encore plus élevé en raison de leur sensibilité incroyablement faible au bruit microphonique. C'est le lampe de préamplification ultime à utiliser dans les applications à gain critique, en particulier dans les positions de premier étage/entrée ou d'autres étages à gain élevé dans la chaîne de lampes de préamplification.

Ces lampes sont sélectionnés au cours d'un processus de test rigoureux 12AX7 et lorsqu'ils s'avèrent être sensiblement plus stables et silencieux dans des applications à gain extrêmement élevé, ils sont équipés d'un blindage par film rétractable, ce qui stabilise davantage le lampe et réduit les interférences et le bruit externes. Les MESA SPAX7 offrent le niveau de bruit le plus bas pour un gain de sortie maximal. Bien qu'ils ne soient pas nécessaires pour obtenir des performances optimales, les SPAX7 sont un lampe idéal à avoir sous la main en tant que pièces de rechange et pour toutes les applications où le plancher de bruit le plus bas et la réponse microphonique la plus faible sont nécessaires.

Tous les lampes MESA offrent une cohérence et une fiabilité inégalées pour N'IMPORTE QUEL amplificateur à lampe, et certainement pour les amplificateurs MESA !

Q et R


There are currently no questions for this product.

Avis


216.73.217.153
0
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
3.4/ 5      4  Avis
5 Étoiles
1
4 Étoiles
2
3 Étoiles
0
2 Étoiles
1
1 Étoiles
0

Bland

0 personne sur 1 ont trouvé cet avis pertinent

Caractéristiques  
Qualité  
Valeur  
Évaluation globale  
Relation au produit   I own it
Succursale   Burlington, Ontario
Overall, this is a very bland and lifeless tube. Tried it in a Dr Z Cure, and Mesa Mark V25.Expensive and not at all satisfying.
Posted by Robert on Mar 1, 2025
Est-ce que ce commentaire vous est utile? Vote helpful Vote not helpful Taguez ce commentaire

Nice change

1 personne sur 1 ont trouvé cet avis pertinent

Caractéristiques  
Qualité  
Valeur  
Évaluation globale  
Relation au produit   I own it
Succursale   Calgary Chinook, Alberta
Picked up one of these to try in the V1 position of my Blues Jr which had Mesa power tubes when I got it. I was looking for something to help reduce background noise. Used a DB meter app on my phone and found this basically knocks off 2 DB of background noise in various volume and tone settings compared to the stock GT 12AX7 that was in V1. There is a notable change in overall tone of the amp. This tube cut almost all low end flubb (really like how the amp now works with my hollow body which can sound very boomy.) and added a nice clarity and chime. It did affect the gain however (Really fells like a 12AT7) so I’m not sure if this tube will stay In the V1 position indefinitely but it a nice tube to have on hand.
Posted by FXO on Jan 16, 2025
Est-ce que ce commentaire vous est utile? Vote helpful Vote not helpful Taguez ce commentaire

Installed in V2

2 personnes sur 2 ont trouvé cet avis pertinent

Caractéristiques  
Qualité  
Valeur  
Évaluation globale  
Relation au produit   I own it
Succursale   Ottawa, Ontario
My Traynor YCV40 had its stock tubes (all 3 tubes were Sovtek 12ax7A) that I bought in 2005. It was time to change them. I wanted a dirtier sound and searched for info on the internet. So I use the GT-12AX7C in V1, to give the dirty tone I was looking for. In V2, right before the send effect loop, I put a Mesa-Boogie SPAX7, as recommended in another review. In V3 (inverter in some references, but called splitter in the Traynor manual) a Mesa-Boogie 12AX7 because I saw in a video that it was better if V3:a and V3:b signal have the same mV, which Mesa-Boogie tubes are supposed to be. I'm very satisfied with the dirty sound of th GT tube. This preamp tubes setup provides me with more color, and more nuances. A pitched harmonic was neatly hearable, which was nit the case with my old and tired stock tubes. I wrote all this information because I don't know how much this single tube is responsible for the change in my amp sound, but I strongly recommend this one.
Posted by Len P on Jun 17, 2019
Est-ce que ce commentaire vous est utile? Vote helpful Vote not helpful Taguez ce commentaire

Back to life!

2 personnes sur 2 ont trouvé cet avis pertinent

Caractéristiques  
Qualité  
Valeur  
Évaluation globale  
Relation au produit   I own it
Succursale   Toronto (Bloor St.), Ontario
Bought one of these to use in the front end of a used Mesa Blue Angel head. Used this with some Mesa 12ax7's and an at7 as phase inverter. Before retubing the amp was lifeless, was worried I bought a dud. Gave the amp a clean, loaded with the boogie tubes and wow. Great response, great low end, sparkle with a strat came back. Also brought back depth to the reverb which is a tube circuit. Maybe a bit on the pricey side but made all the difference. I'm going to look at these for my Marshall jcm900.
Posted by Andrew on Mar 18, 2019
Est-ce que ce commentaire vous est utile? Vote helpful Vote not helpful Taguez ce commentaire