Bose Professional Products

• Recommended for audiences up to 300


• 12-speaker articulated line array delivers 180-degree horizontal sound coverage


• Produces consistent tonal balance with less volume drop-off over distance


• Lightweight, interconnecting pieces allow for easy transport, setup and breakdown


• Four-channel ToneMatch audio engine with studio class effects


• B1 bass module included

Spend less time setting up your gear and more time enjoying it. The new L1 Model 1S portable line array system delivers a potent combination of portability and performance. It's compact and light enough to make setup quick and easy, yet powerful enough to fill a mid-sized venue. This system works well for solo musicians, bands and public speakers. And the ToneMatch audio engine provides a suite of studio-class effects and tone-shaping tools to give you just the sound you're looking for. Includes one B1 bass module for enhanced low-end performance.

Put your PA behind you

The vertical configuration of the system's small, closely spaced drivers allows the L1 Model 1S system to project sound forward and to the sidesdelivering 180-degree coveragebut very little up and down, reducing unwanted reverberation. This produces consistent tonal balance as sound spreads more evenly across the stage and into the audience, and the volume level drops off much more slowly than with a conventional speaker.
Unique Bose technologies enable the system to serve as both PA and monitor. It can be positioned behind or to the side of the performerand you hear just what the audience hears. You're in control, and there's no need for conventional monitors, mixers and PA systems.

Convenience to go

The three components of the L1 Model 1S systemupper array, lower extension and power standconnect quickly and easily without the need for separate speaker stands. Setup and breakdown take just minutes. And everything stores neatly into the included carry bags, making transport easy too.

Deep bass from small enclosures

The B1 bass module is our more portable bass option. It is considerably lighter and smaller than conventional bass bins required for the same performance. And it ensures more accurate amplification of lower notes for most voices and instruments.

With the L1 Model 1S system you can add a second B1 module or power one B2 bass module for more flexibility and even greater power.

Powerful multichannel audio engine

Combining the T1 ToneMatch audio engine with your L1 system expands your options to connect additional instruments and microphones. You can also use the ToneMatch engine to fine-tune your sound with powerful, proprietary tone-shaping tools.

The compact, four-channel engine provides fingertip control of a library of ToneMatch presets. Just touch a button to make hundreds of precise refinements to the sound of instruments and microphones. The engine also features a complete suite of studio-class reverbs, additional effects and dynamics processing. It connects to the L1 Model 1S system via a single digital cable for quick, streamlined setup.

Specifications:

Dimensions/weight

L1 Model 1S top array: 111 cm H x 9 cm W x 10.5 cm D (7.4 kg)
L1 Model 1S bottom extension: 100.6 cm H x 10.6 cm W x 10.5 cm D (3.8 kg)
L1 Model 1S power stand: 12.8 cm H x 26.2 cm W x 69.2 cm D (10.7 kg)
B1 bass module: 38 cm H x 26 cm W x 45 cm D (11.4 kg)
T1 ToneMatch audio engine: 6.76 cm H x 16.6 cm W x 20.9 cm D (1 kg)

Inputs/outputs

• Mic/line inputs (1 - 3) feature combination analogue connectors accepting balanced XLR or unbalanced 0.63 cm TRS audio cables.
• Line inputs (4/5, L/R) for analogue stereo connections to keyboards, mixers and computers. Inputs accept balanced 0.63 cm TRS cable. Edit control affects both channels.
• Trim controls and signal/clip LEDs (1 - 4/5) for adjusting levels of input signals. Green/yellow/red LEDs show signal status and help you set gain levels properly.
• Preamp outputs (1 - 3) for connecting channels' dry output signals to recording gear or other amplifiers via balanced 0.63 cm TRS cable.
• Aux output can be used with aux mode to create independent submix of channels 1 - 4/5 to route to other amplifiers or recording gear.
• Master analogue output for connecting to additional L1 systems, amplifiers or recording gear via balanced 0.63 cm TRS cable. Select from pre- or post-master volume settings.
• ToneMatch port to connect digital output of engine to L1 Model 1S power stand via included ToneMatch digital cable.
• USB port for updating ToneMatch audio engine and backing up scenes via USB connection to your computer.

In the box

L1 Model 1S single bass package

L1 Model 1S power stand and cable
L1 Model 1S top array and bottom extension
Loudspeaker carrying bag
Power stand carry bag
B1 bass module and cable
B1 slip cover

T1 ToneMatch audio engine

T1 ToneMatch audio engine and cable
ToneMatch engine protective cover and carrying bag
ToneMatch engine mounting bar and carriage (not compatible with L1 Compact system)