Traynor DynaBass 200 Watt - 2x10 Bass Combo Amp
Additional Photos:
Ideal for any playing style, these 200 watt combos easily handle any vintage or modern acoustic or electric bass with passive and active instrument level 1/4-inch inputs. Available in either 1x15 and tweeter (DynaBass 200) or 2x10-inch and tweeter (DynaBass 200T) configurations, there is truly a version perfectly suited to every player.
Manufactured in North America using solid birch plywood cabinet construction, all metal grille to fully protect the high quality speaker components, metal flip handles and corners, and an all metal chassis, the DynaBass 200 and DynaBass 200T deliver unmatched road-worthiness as well as great bass tone.
Both the DynaBass DynaBass 200 and DynaBass 200T use a versatile 4-band tone stack with Scoop Control to ensure your desired sound is right at hand. The tweeter defeat switch provides the solution to bassists seeking vintage style tone. The XLR balanced direct output can be switched pre EQ (for pure instrument tone) or post EQ to send your sound to front-of-house or recording console. A 1/4-inch headphone jack is provided for private practice.
The DynaBass 200 1x15 is a square cabinet and ships with removable casters for maximum mobility. The DynaBass 200T 2x10 is a modified wedge shaped cabinet that may either stand upright for filling a stage or tilt back for convenient personal monitoring.
Features:
4-band EQ w/ Scoop Control
Active and Passive Instrument Level Inputs
Switchable Limiter and Mute functions
XLR balanced Line Output with Pre/Post-EQ Selector
Effects Send & Return jacks
Tuner Output
Headphone jack
Twin Deep-Excursion ten-inch custom bass drivers
Switch-Defeatable Tweeter
Solid Birch Plywood Cabinet Construction
All Metal Grille and Chassis
Integrated Metal Flip Handles
Specifications:
Type - Bass Combo
Power @ min. impedance (Watts@Ohms) - 200@2
Minimum Impedance (Ohms) - 2
Burst Power (Watts) - 2 cycle = 250
Speaker - 15-inch, 200Wpgm, 4 Ohms, ceramic magnet
Tweeter - Piezoelectric, 30Wpgm
Channel Inputs - 1/4" with 0dB and -6dB attenuation
Controls - Volume,Bass,Low-Mid,High-Mid,Treble & Scoop
Scoop Range - 0 to -10dB @ 400Hz
Channel Buttons - Limiter on/off, Mute on/off, Pre/Post-EQ Line Out
Input Sensitivity (mV) - 25 @ 0dB Input
Line Out Type - balanced XLR Pre/Post EQ Switchable
Line Out Level (Vrms) - 1.0
Effects Loop - Send & Return
LED Indicator - Power & Mute On
Protection - Thermal & Short Circuit
Limiter - Switchable
Extension Speaker Output - 1/4" (rear panel)
Headphone Jack - Yes
Other Features - Tuner Out jack & Tweeter Defeat switch
Dimensions (DWH, inches) - 14.25 x 20.75 x 23.5
Dimensions (DWH, cm) - 36.5 x 53 x 60
Weight (lbs / kg) - 60 / 27.25
Q & A
Reviews
Rental rates
This product is normally available for rental. Please contact your preferred location for further information.
1 Day from $8.00
1 Week $16.00
1 Month $32.00
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| DynaBass 200 Watt - 2x10 Bass Combo Amp | 263633 |
