MOTU HD 192 System (PCI-E)

• Twelve channels of balanced, 24-bit/192kHz analog I/O on XLR
• Higher bandwidth PCIe-424 card.
• High-definition converters.
• Front panel metering and power switch.
12 XLR Inputs and Outputs
All 12 XLR inputs and outputs on the HD192 rear panel support operation at 44.1, 48, 88.2, 96, 176.4 and 192kHz. Latest-generation converters and state-of-the art design provide exceptional audio quality. The measured dynamic range for the 12 analog inputs is just over 120 dB. AES/EBU digital I/O is also provided at samples rates up to 96kHz with independent real-time sample rate conversion on the digital input and output. A separate "AES word in" BNC connector allows users to clock the AES/EBU section independently from the rest of the system. System word clock input/output is also provided on BNC connectors.
PCIe-424 Card
The HD192 core system includes the PCIe-424, the same enhanced PCIe card used by MOTU's 2408mk3 and 24I/O. The PCIe card allows you to take advantage of the next-generation functionality of PCIe architecture; the bus technology that will dominate the personal computer for the coming decade. Unlike older parallel technologies, PCI Express guarantees each device dedicated bandwidth to and from the system controller. PCI Express cards and slots are defined by their bandwidth, or number of data lanes - typically one lane, four lanes, eight lanes, or 16 lanes. At 250 MBps per lane, a four-lane slot can transfer data at up to 1 GBps and an eight-lane slot, up to 2 GBps - almost twice as fast as a 133MHz PCI-X slot at a maximum throughput of just over 1 GBps. The new PCIe-424 card can be installed in any PCI Express slot (regardless of its number of lanes). PCI Express delivers more than enough bus bandwidth for the 424 card, while ensuring that other PCI devices won't "steal" bus cycles from the 424 card. PCIe means more bandwidth, less noise, and a vastly improved scheme for high-speed data transfers - just what you need for high-quality audio.
The PCIe-424 card adds a fourth Audio Wire port that allows users to connect up to four MOTU audio interfaces to the computer. At 12 channels each, a fully expanded HD192 system provides 48 simultaneously active input and output connections at sample rates up to 192 kHz (or as many channels as the host computer supports at the 4x sample rates). HD192 users can connect any MOTU PCI audio interface to their PCIe-424 card.
MOTU HD192 Converters
The most important link in the digital recording chain is the A/D converter. It is the critical component that converts your analog input signal into digital information. The higher the quality of the A/D converter, the better your recordings will sound.
The 192-kHz converters in the HD192 are the very same used in more expensive HD systems. With 120dB A-weighted dynamic range and a THD+N of 0.0005%, the HD192 is simply the best sounding front end you can buy for your digital audio workstation.
Front Panel Metering
The HD192's front panel provides dedicated 19-segment level meters for all 12 inputs and outputs. Two over meters are included, a temporary over meter and an over/hold meter that is resettable via software. Comprehensive clock status LEDs are also included so you can see at a glance the current sampling rate and clock source.
Useful in the unlikely event you wish to turn off your HD192, a front panel power switch is provided. An interesting fact about MOTU Audio interfaces is that they are hot swappable. This means you can power off, plug-in, add and remove interfaces without turning your computer off or restarting.
MOTU HD192 Core PCI-e Features:
• Twelve channels of +4, balanced, 192-kHz 24-bit analog inputs and outputs using XLR jacks.
• AES/EBU digital I/O
• 19-segment LED meters on every input and output
• 16, 20, and 24-bit recording at 44.1, 48, 88.2, 96, 176.4 or 192kHz
• Word clock in and out
• Dedicated word clock input for AES/EBU I/O
• AudioWire connector for PCIe-424 audio card
• A-weighted dynamic range 120dB
• THD+N of 0.00056% (-106dB)
• R/CORE transformers for efficient, low-heat operation with virtually no magnetic interference or acoustic hum
Q et R
Avis
Protégez votre investissement avec la Garantie de fiabilité Long & McQuade.
Une bonne garantie est souvent un facteur décisif au moment d’un achat. Étant donné qu’une réparation peut être très dispendieuse, les manufacturiers n’offrent en général qu’une protection limitée d’un an couvrant seulement les défauts de fabrication. Lors d’une acquisition aussi importante que celle d’un instrument de musique ou d’une pièce d’équipement, vous voudrez avoir l’assurance que votre achat sera protégé de façon adéquate.
C’est pourquoi Long & McQuade offre une année GRATUITE de sa Garantie de fiabilité sur la plupart de ses produits. Cette couverture, qui bonifie celle du fabricant, vous procurera la tranquillité d’esprit que vous recherchez.
En quoi la garantie Long & McQuade se distingue-t-elle de celles des autres fabricants?
- Fiabilité assurée : l’usure normale de certaines pièces est couverte. Le produit fonctionnera aussi bien qu’au premier jour pour toute la durée de la protection. Pour les instruments d’orchestre, nos techniciens et techniciennes évalueront la nécessité d’effectuer un nettoyage en profondeur, un remplacement de tampons ou un nettoyage à ultrasons. Ces services ne sont pas offerts systématiquement dans le cadre de la Garantie de fiabilité.
- Possibilité de remplacement : si votre produit est irréparable ou coûte trop cher à remettre en état, nous l’échangerons contre un modèle identique ou équivalent, sans frais supplémentaires. Si ce n’est pas possible, nous vous accorderons un remboursement complet.
- Politique anticitron : si votre article présente un problème récurrent, nous le remplacerons.
- Accessibilité : vous pouvez vous prévaloir de votre garantie dans n’importe quelle succursale Long & McQuade.
- Réglage de guitare : une mise au point gratuite est incluse à l’achat de toute guitare neuve ou d’occasion.
- Prêt de matériel : un produit de rechange peut être mis à votre disposition pendant la réparation de votre article.
- Survoltage couvert : l’appareil est garanti même s’il est endommagé par une surtension.
- Assurance-accessoires : tous les accessoires fournis avec le produit (pédale, étui, etc.) sont couverts.
- Usage commercial approuvé : l’équipement acheté pour une utilisation intensive bénéficie aussi de cette protection.
Achat d’années additionnelles de garantie
Certains fabricants offrent une garantie de plus d’un an, mais qui est en général limitée et moins avantageuse que la nôtre. Lorsque c’est le cas, la prolongation de notre protection vous sera tout de même profitable, du fait qu’elle est plus complète et pratique.
Vous pouvez acheter des années supplémentaires de notre protection si vous souhaitez en profiter plus longtemps. Les tarifs sont les suivants :
- Produits NEUFS : à partir de 4 % du prix actuel de l’article à l’état neuf par année supplémentaire.
- Produits D’OCCASION : à partir de 4 % du prix actuel de l’article à l’état neuf pour passer initialement de trois mois à un an. À partir de 4 % pour chaque année de plus.
- Guitares : 4 % du prix actuel de l’article à l’état neuf pour passer d’un an à deux. 4 % pour chaque année de plus. Tarif maximum de 45 $. Une mise au point gratuite supplémentaire n’est pas incluse avec l’achat d’années de couverture additionnelles.
- Instruments d’orchestre : 4 % du prix actuel de l’article à l’état neuf pour passer d’un an à deux. 4 % pour chaque année de plus.