Merging
Hapi Small Format Networked Audio Interface
Additional Photos:
Control Room I/O for RAVENNA Studios
When Horus is doing the heavy lifting in the live room, let Hapi be the perfect complement to your RAVENNA or AES67 connected control room by providing pristine talkback and multichannel speaker outputs.
3rd Party Workstations Welcome
Mac or PC, users now have access to one of the most sonically impressive mic preamps and ADDA interfaces the audio industry has ever seen. Using dedicated RAVENNA/AES67 drivers, users of any software on either the Mac or PC platform are able to use Hapi as their I/O solution.
Small I/O Stage Box
For recording setups where smaller amounts of inputs or outputs are needed in a variety of locations around the room, Hapi provides a cost-effective solution with mind-blowing results.
The Ultimate Mastering Interface
With analog option cards that match a level of quality never heard of before (no pun intended) and one of the only converters ever to be known for "not having a sound at all", Hapi is able to provide just the right amount of I/O without pushing budgets too far.
Post-Production I/O
The perfect post interface has arrived. Just enough analog and digital I/O and a comprehensive set of referenced sync options including LTC/MTC and video reference, all connected using nothing more than a simple CAT5E/CAT6 cable. And, matched with the IRIS Networked Post System, Hapi provides a professional I/O solution for the truly networked post studio.
Installation AV with Ovation
Match the power of Merging's multichannel audio and show sequencer with Hapi units placed strategically around the installation to provide the ultimate flexibility in creative AV.
Key Features:
• 8x AES/EBU + 8x ADAT or 2x SPDIF
• Works from 44.1kHz to 192kHz (Premium up to DXD/DSD256)
• Signal routing from any input to any combination of outputs
• RAVENNA / AES67 Compatible
• Browser-based remote access using any web enabled device
• AC or DC power supply options
• Modular design for analog and additional Digital I/O
• Near-zero latency from in to out
Specifications:
• Case Material: Powder Coated Steel
• Front Panel Material: Brushed Aluminum
• Weight (excluding redundant PS): 4.5 kg / 10 lbs
• Dimensions (1U rack mounting): 483 x 320 x 44 mm
• Voltage (AC): 90V-260V, 47-63 Hz
• Voltage (DC): 10-14V
• Power Consumption (Max): less than 30 Watts
• Front Panel TFT size/resolution: OLED (160x128 px)
Headphone Monitor Jacks:
• Max output Level (Unbalanced) Load = 300 Ohms +14.5 dBu
• Output Impedance: 75 ohms
• Dynamic Range (A-weighted, typ): 112 dB
• THD+N (1 kHz) @ -2 dBFS: less than -100 dB (0.001 %)
• Gain Range (software controlled): -60 dB to +12 dB
• Gain Step/Precision: 1dB / +/- 0.05 dB
Connectors:
• "Sync" Cable (LTC/Video Ref/MIDI)
• D-Sub 15Pin
• LTC In & Out (via "Sync" Cable)
• Balanced XLR
• Video Reference In (via "Sync" Cable)
• BNC
• MTC (I/O via "Sync" Cable)
• 5-Pin DIN
• Word Clock Input (Switchable 75 ohm Termination)
• BNC, 0.5Vp-p min
• Word Clock Output (Zout = 35 ohms)
• BNC, 5Vp-p
• AES type/pinout DB-25 (Tascam Dig.)
• ADAT / SPDIF
• Heaphone Jack 1 & 2
• 6.3 mm(1/4")/3.5mm
• RAVENNA Primary / Secondary (GbE)
• RJ45
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Hapi Small Format Networked Audio Interface | 506415 |
