Fender Pro TB-1200 Head
Model Name: TB-1200 Head
Series: PRO Series
Type: Hybrid Head (Tube Preamp, Solid State Power Amp)
Output: 1200 watts @ 2 ohms, 800 watts @ 4 ohms, 550 watts @ 8 ohms
Ohms: N/A
Speakers: N/A
Channels: 1 Channel
Features: Front Panel Feature Set:
*Fender passive tone stack (remember passive means CUT ONLY)
-Delivers that creamy tube tone
-Volume, Bass, Mid & Treble controls for the "clean" sound
*Tube Overdrive section
-Gain, Volume and Blend
-This channel sits on top of the clean (which preserves the warm clean pillow under the overdrive)
-Blend adjusts the clean vs. dirty ratio of the tone (can be set "touch-sensitive")
-Footswitchable (4-button footswitch is included)
*Vari-Q section - A smart semi-parametric EQ
-Cutting frequencies automatically NARROWS the focus of the Q for a well-defined cut (notch)
-Boosting frequencies automatically WIDENS the focus of the Q for a broader, more musical boost
-This intelligent Q control keeps "on the fly" operation simple and effective
-Footswitchable (4-button footswitch is included)
*Room Balance - Global EQ shift for cabinets/stage response
-Clockwise cuts lower end frequencies while simultaneously raising upper frequencies
-Counter-clockwise brings up lower end frequencies while simultaneously lowering upper frequencies
-Room Balance Does NOT affect XLR output (soundman gets unaltered signal)
*Master Volume - One level control that affects everything except Balanced Line Out, Tuner and FX Send
*Mute
-Cuts all signal except for the Tuner & FX send
-Footswitchable (4-button footswitch is included)
Rear Panel Feature Set:
*Balanced Line Output is a true electronically balanced XLR output with Ground Lift, Pre/Post switches and Level control, for maintaining a clean balanced line output signal
*Tuner Output (post-tube, always on, even when the MUTE is engaged)
*Effects Loop with trim control and level switch (can be used as an adjustable boost control) - Footswitchable
*Full-Range 1/4" and Speakon speaker output jacks
*Footswitch input (4-button footswitch is included)
*Additional Instrument Input on the back (in case your rack setup favors having an input in the back)
Controls: Front Panel: Vintage Tube Tone:
Input -9dB Pad Switch,
Mute,
Volume,
Bass w/Deep Switch (Pull to Activate),
Mid,
Treble w/Bright Switch (Pull to Activate),
Tube Overdrive:
(Enable/Disable Switch),
Gain,
Volume,
Blend
Vari-Q:
(Enable/Disable Switch),
Frequency,
Level/Q,
Room Balance,
Master Volume,
Rear Panel: Balanced Line Output with Ground Lift,
XLR Jack,
Level,
Pre/Post EQ Select Switch,
FX Loop with Trim,
+4dBu/-10dBv level switch,
Send/Return Jacks
Covering: Brushed Aluminum Rackmount Panel
Weight: 34 lb. (15.4 kg)
Dimensions: Height: 3.5 (8.8 cm),
Width: 19 (48.2 cm),
Depth: 15 (38.10 cm)
Power Handling: N/A
Tube Complement: 2 X 12AX7
Cover: N/A
Accessories: TBFS-4, 4-Button Footswitch with Built-in Tuner P/N: 0070683000,
(4-Buttons Control: Overdrive, FX Loop, Vari-Q and Mute)
Footswitch: TBFS-4, 4-Button Footswitch with Built-in Tuner (Included) P/N: 0070683000,
(4-buttons control: Overdrive, FX Loop, Vari-Q and Mute)
Introduced: 6/2008
Notice: Product Prices, Features, Specifications and Availability Are Subject To Change Without Notice
Q & A
Reviews
Bass-ically Superb
1 of 1 customers found this review helpful
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: Starting at 4% of the current new selling price to double the warranty from 1 year to 2 years. Starting at 4% for each additional year.
- USED products: Starting at 4% of the current new selling price to increase the warranty from 3 months to 1 year. Starting at 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Pro TB-1200 Head | 290049 |
