MIPRO
ACT-727 Full-Rack Dual-Channel True Diversity Receiver, Frequency 6A
Additional Photos:
ACT-727 is a Dual-Channel, 1U rack-mountable metal receiver with 104 selectable frequencies and 16 preset compatible channels. It features True Diversity Reception for the best reception quality. In 2017, ACT-7 Series narrowband receivers have been upgraded with a headphone monitoring connector.
Key Features:
- EIA standard 1U rack-mountable metal receiver.
- The narrowband receiver has 104 preset channels. Auto Scan function allows quick search for an interference-free working channel.
- UHF PLL synthesized circuit and advanced RF and IF circuitry to improve anti-interference characteristics and increase the number of interference-free channels available.
- World's first ACT function provides precise and rapid frequency sync to the transmitters.
- True diversity receiving for best reception quality. Dual "PiloTone & NoiseLock" circuits minimize interference.
- Receiver provides bias voltage for MIPRO antenna systems to enhance reception range and signal stability.
- Industry's only full-colour VFD screen delivers a bright, clear viewing in day or night environments with automatic bright (working) and dim (standby) displays during performance.
- All controls are intuitive and easily set up via a single rotary knob.
- Industry's only RF interference warning indicator for proper adjustments of the SQ level. Increase sensitivity to extend the receiving range; decrease the sensitivity to reduce interference.
- Single channel or mixed output, switchable between three output levels for the best sound quality options.
- MIPRO RCS.Net software allows real-time computer setup, control and monitoring.
- Built-in 100 ~ 240 V AC switching power supply ensures system safety and stability.
- Designed and made in Taiwan ensures high quality and value.
Technical Specifications
Chassis: EIA standard 19" 1U
Receiver Bandwidth: Narrow
Frequency Range: UHF 480~934MHz
Bandwidth: 24MHz
Preset Frequencies
• 104 selectable channels
• Group 1~6 > 8 compatible channels
• Group 7~8 > 12 compatible channels
• Group 9~10 > 16 compatible channels
Receiving Mode: True diversity
Oscillation Mode: PLL synthesized
Stability: +/-0.005% (-10 ~ +60℃)
Sensitivity: 6 dB V, at S/N > 80 dB
S/N Ratio: > 105 dB (A)
T.H.D.: < 0.5% @ 1kHz
Frequency Response: 50Hz ~ 18kHz, with high-pass filter
Squelch: "PiloTone & NoiseLock" dual-squelch circuit
Audio Output Adjustment: Output level accurately pre-adjusted to equal to the microphone capsule
sensitivity.
Maximum Output Level: Balanced: +16dBV | 0dBV | -6dB; Unbalanced: +10dBV | 0dBV | -6dB
Output Connectors: Balanced XLR
Output Switch: Single channel output or mixed output
Operation: Manual or PC remote control via optional software
Squelch Adjustment: Rotary Controller
Squelch Display: VFD Screen
Power Supply: Built-in 100~240V AC Switching Power Supply
Dimensions: 482(W) 44(H) 265(D) mm | 19(W) 1.7(H) 10.5(D)"
Weight: Approx. 3.0 kg | 6.6 lbs
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| ACT-727 Full-Rack Dual-Channel True Diversity Receiver, Frequency 6A | 514399 |
