RODE
Complete Studio Kit with NT-1 Condenser Mic and AI-1 Audio Interface
Studio Kit Key Features:
• NT1 large-diaphragm condenser microphone delivers superb detail and warmth, and extremely low self-noise (just 4.5dBA).
• AI-1 features an ultra-low-noise XLR input and a discreet, high-power headphone amplifier for studio-quality recording, monitoring and mixdown.
• The Neutrik™ combi-jack input facilitates the connection of microphones, guitars, synthesisers and other instruments for ultimate flexibility.
• Includes the studio-grade SM6 shock mount and pop filter, and an XLR cable so you can get recording right away.
• Ableton Live Lite free with every purchase.
AI-1 Audio Interface
The AI-1 is a studio-grade audio interface suitable for connecting both microphones and musical instruments to a computer or tablet. It features an ultra-low-noise preamp, a high-power headphone amplifier, and balanced line outputs. Switchable 48V phantom power facilitates the connection of condenser microphones, and zero-latency monitoring mode allows for seamless recording.
The AI-1's single input is a Neutrik Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go. Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.
AI-1 Features
• Allows zero-latency playback by enabling the direct monitoring feature
• Playback via headphones/speakers with the high quality discrete headphone amplifier
• 48V Phantom Power
• Class compliant - no need to install any drivers
• High quality Neutrik combo jack input
• Discrete Class-A preamp
AI-1 Specs
Computer Connectivity: USB
Form Factor: Desktop
Simultaneous I/O: 1 x 2
Number of Preamps: 1
Bit Depth: 24-bit
Sample Rates: 44.1 kHz 48 kHz 88.2 kHz 96kHz
Analog Inputs: 1 x Neutrik XLR-1/4 combo
Analog Outputs: 2 x 1/4 (impedance balanced) 1 x 1/4 (headphones)
Direct Monitor: Yes
USB: 1 x USB Type C
Bus Powered: Yes
OS Requirements: Mac OS 10.10 or later Windows 7 or later
Power: USB bus-powered
Net Weight (grams): 560
Height x Width x Depth (millimetres): 38 x 124 x 100
NT-1 Large-Diaphragm Condenser Microphone
The NT1 is a revolutionary 1" diaphragm condenser microphone from Rode. It has been developed with a focus on detailed midrange response, coupled with silky smooth high frequencies, and warm, round, bass reproduction to make the NT1 an absolute standout in its class.
Features
• Large 1" condenser capsule with gold-plated membrane
• Cardioid polar pattern
• Ultra-low noise, self noise of only 4.5dB (A)
• Smooth frequency response (20Hz 20kHz)
• True condenser operation with cardioid polar pattern
NT1 Specs
Output Connection: 3 Pin XLR. Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Acoustic Principle: Pressure gradient
Active Electronics: JFET impedance converter with bipolar output buffer
Directional Pattern: Cardioid
Frequency Range: 20Hz ~ 20kHz
Output Impendence: 100Ω
Equivalent Noise: 4.5 dBA SPL (as per IEC651)
Maximum Output: +8 dBu (1kHz, 1% THD into 1K Ω load)
Sensitivity: 29 dB re 1V/Pa (35mV @ 94dB SPL) 2dB @ 1kHz
Dynamic Range: 128 dB SPL
Maximum SPL: 132 dB SPL
Signal-to-Noise Ratio: 90 dBA SPL (as per IEC651)
Power Requirements: 24V phantom power 48V phantom power
Net Weight (grams): 395
Colour: Black
Diameter (millimetres): 50
Length (millimetres): 187
Box Contents:
1 x NT1
1 x AI-1
1 x SM6
1 x XLR to XLR Cable
1 x USB-C to USB-A Cable
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Complete Studio Kit with NT-1 Condenser Mic and AI-1 Audio Interface | 516486 |
