Departments > Pro Audio & Recording > Mixers > Misc Recording Mixers > Focusrite > iTrack Dock Studio Pack with Headphones and Microphone

Focusrite

iTrack Dock Studio Pack with Headphones and Microphone

SKU: # 454693   |   Model: # ITRACK-DOCK-STU   |    Product Reviews0 Reviews  Write a Review

iTrack Dock Studio Pack with Headphones and Microphone
 This product is no longer available.
iTrack Dock Studio Pack includes the Focusrite iTrack Dock, a CM25 condenser microphone with stand clip, professional quality HP60 closed-back headphones and a three meter XLR cable. The large diaphragm CM25 condenser mic captures beautifully crisp and clean sound, so your tracks will always sound as good as you do. It also comes with a long cable and a stand clip, so you can get started straight away.

The art of recording is all about getting lost in the music. You don't want background noises interfering or distracting you when you're trying to concentrate. These professional standard HP60 closed-back headphones block out background noise and give you absolutely stunning playback. They let you hear everything you want to hear, and nothing you don't so you can stay entirely focused while recording and mixing.

Whatever type of music you want to make, iTrack Dock is the easiest way to make professional recordings on iPad. Just dock, plug in and hit record. There's no need to learn anything new. Record your songs directly into your favourite apps, including Garageband, Cubasis and Auria.

Technical Specs:

USB MIDI port for class compliant MIDI devices (However, known to be incompatible with Korg microkey 37 and Korg MS20ic)

Analogue Input Performance - Mic
Frequency Response: 20Hz - 20kHz +/- 0.2 dB (minimum gain)
THD+N: < -99dB (minimum gain, -1dBFS input with 20Hz/20kHz bandpass filter)
Equivalent Input Noise (EIN): < -125dBu CCIR-RMS (measured at maximum gain with 150 ohm termination)
Gain Range: -4dB to +46dB (dBFS / dBu) 1dB
Max Input Level: > +4dBu (at 1% THD)

Analogue Input Performance - Line
Frequency Response: 20Hz - 20kHz +/- 0.2dB (minimum gain)
THD+N: < -98dB (min gain, -1dBFS at output and 20Hz/20kHz bandpass filter)
Noise (NiPoS): < -104 dBFS CCIR-RMS (measured at min. gain with 50 ohm termination)
Gain Range: -22dB to +28dB (dBFS / dBu) 1dB
Max Input Level: > +21dBu (at 1% THD)

Analogue Input Performance - Instrument
Frequency Response: - 20kHz +/- 0.2dB (minimum gain)
THD+N: < -90dB (min gain, measured at Max Input Level -1dB, 20Hz/20kHz bandpass filter)
Noise (NiPoS): < -104 dBFS CCIR-RMS (measured at min. gain with 50 ohm termination)
Gain Range: -16dB to +34dB (dBFS / dBu) 1dB
Max Input Level: > +14dBu (at 1% THD)

Analogue Output Performance
Nominal Output Level: 0dBFS = > +10dBu, balanced
Frequency Response: 20Hz - 20kHz +/- 0.2dB
THD+N: < -100dB, balanced (0dBFS input 20Hz/20kHz bandpass filter)

Digital Performance
Clock sources: Internal clock only
D-A Dynamic Range: 105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB
Supported sample rates: 44.1 KHz, 48 KHz, 96 KHz, 24 Bit

Input Metering
Ring LED lit Green: Signal present (-24 dBFS)
Ring LED lit Red: Signal overload (0dBFS), peak held for approximately 1 second

Weight and Dimensions
Height: 64mm
Width: 280mm
Depth: 168
Weight: 0.7 Kg

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions