Sorry, this item is not available for purchase

Gear Hunter

Providence Sonic Drive

SKU: 19 Serial: 460075
Quantity Available: 1 Condition: Used


Description

The Providence Sonic Drive is a responsive overdrive effect that gives the guitarist extraordinary expressive capability in a wide
range of playing situations, from rhythm to lead. Even with distortion applied, excellent definition and balance are achieved from
the first through sixth strings. At lower gain settings it's possible to pound out powerful chords with fast attack and a wild edge that
stands out clearly from a wall of sound. Turn up the gain for a smoother lead sound that responds intimately to picking nuances.
●In a normal True-Bypass circuit, in bypass mode the audio signal passes through two switch contacts. But in the SONIC
DRIVE, in bypass mode the audio passes through a single contact, thanks to a single contact true-bypass circuit. The result is
much higher sound quality and reliability than that provided by previously existing products.
●The FAT switch provides low range control. Turning ON the FAT switch increases the low range gain, resulting in a fatter sound.
●Due to the adoption of the new double-contact grounding circuit (D.C.G. Circuit), by inserting a monaural plug into the output jack,
the shield (sleeve) of the plug provides two points of contact to the pedal’s ground circuit. By increasing the area of the point of contact,
it becomes more difficult for a loose connection to occur, and provides the additional advantage of improved sound quality.
●The LED in the SONIC DRIVE doesn't just indicate the ON/OFF status of the effect, it also functions as a battery voltage monitor. If the battery voltage drops to less than about 7V, the LED
starts to go out. In this case, the pedal effect is still output, but the
battery should be replaced to ensure sufficient operation.
■Main Specifications
●Controls: LEVEL, TONE, DRIVE, FAT Switch
●Jacks: Standard 1/4 inch phone jacks (Input/Output),
DC9V Input jack (AC adaptor jack)
●Power: 9V battery (1), AC adaptor
●Power consumption: DC9V approx. 8mA (with effect turned ON)
●Size: 115(D) x 72(W) x 50(H)mm
●Weight: Approx. 250g (without battery installed)