Gear Hunter

EarthQuaker Devices - EQDAFT2

Description

The Afterneath sounds a lot like it looks - a wizard in a cave in a box. You are the wizard - or sorceress, if you prefer - and the cave is your instrument's signal, vast, expansive, and magical.

Controls:
* Length: Controls the decay length of the reverb.
* Diffuse: Adjusts the spread of the reverb. Sharper with more attack counter clockwise, more ambient and washy as you turn it clockwise.
* Dampen: Clockwise for brighter tones, counter clockwise for darker tones.
* Drag: This digital reverb is made up of a bunch of short delays, this separates the delay lines creating a stuttering, pingy effect. This is the coolest control on the Afterneath, we highly advise slowly turning this while you let notes ring out for a cool warped speed effect. More delay as you turn it counter clockwise, more reverb as you turn it clockwise.
* Reflect: Controls the regeneration of the reverb, turn clockwise for more wash and echos, counterclockwise for less. This will self oscillate if turned up high.
* Mix: Blends the wet signal into the dry. Though it does not actually go full wet, it will gradually lower the clean level as you turn it clockwise and give the appearance of full wet.

Hear the Afterneath on Soundcloud.

Specifications:
* Dimensions: 4.625 x 2.5 x 2.25 inches
* Power: EarthQuaker pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. Pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies are recommended. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!
* Current Draw: 65 mA.

The Afterneath is true-bypass, and built one-at-a-time by a wizard, two bards, a paladin, a monk, a handful of rangers, a couple druids, a barbarian, a rogue, and a Dungeon Master in the Gelatinous Cube of Akron, Ohio, USA.

The Afterneath uses silent relay-based soft touch switching. Audio will not pass without power.