Gear Hunter

Lewitt - LCT 1040 Ultimate Microphone System

Description

***All photos are of serial number X550006 - Taken by the team at L&M Brampton - Everything included in purchase is shown in photos***

Socials, Sale Details, Giveaways, Lessons and Even More Deals!

The LCT 1040 microphone system offers 4 all-analog tube characteristics and a crystal-clear FET circuit to create the perfect sound. The LCT 1040 microphone system gives you the power to create the sound you envision using 4 all-analog tube characteristics and a crystal-clear FET circuit. The detachable remote control allows you to make all settings from your sweetspot.

Features
* Premium Tube and FET microphone in one
* Robust desktop controller with separable power supply for remote console control
* Variable tube / FET setting to blend between the solid state circuitry and the built in tube
* Gold-sputtered 1-inch true condenser capsule
* Four switchable, all analog tube settings: Clear, Warm, Dark and Saturated
* Completely variable Polar Pattern settings from Figure 8 to cardioid to omnidirectional and everything in between.
* Reverse polarity switch to capture rear side of the mic
* Stepped low cut filter with 40, 80 and 120Hz settings.
* Input attenuation with -6, -12 and -24dB pad
* Separate outputs for the total blend and the straight FET info for post creativity.

In the Box
- Tube microphone
- Power supply
- Remote control
- Dual-layer magnetic pop screen
- Shock mount
- Microphone mount
- 11-pin cable
- Mil-spec transport case

Specifications
Type: Condenser, externally polarized
Acoustical operating principle: Pressure gradient transducer
Transducer ⌀: 25.4 mm (1 inch)
Polar patterns: Seamless blend - Omni, wide cardioid, cardioid, supercardioid, figure-8
Frequency range: 20 - 20,000 Hz
Sensitivity: 17.2 mV/Pa, -35.3 dBV/Pa (cardioid)
Self-noise: 10 dB (A) FET, 13 dB (A) tube (cardioid)
Max SPL at 0.5% THD: 137 dBSPL (FET), 0 dB attenuation
Signal/noise ratio: 84 dB (A) FET, 81 dB (A) tube
Dynamic range: 127 dB (A) FET
Low-cut filter: lin 40 Hz (12 dB/oct), 80 Hz (12 dB/oct), 120 Hz (6 dB/oct)
Pre-attenuation: 0 dB, -6 dB, -12 dB, -24 dB
Internal impedance: 83.8 Ω
PSU - supply voltage: 230 V, 50 Hz; 110 V, 60 Hz
Current consumption: 230V - 170 mA, 110V - 240 mA
Connector PSU and remote: Gold-plated 3-pin XLR by Neutrik
Connector: 10-pin audio cable by Hirose Electric
Microphone enclosure: Zinc die cast
Microphone dimensions: 196 x 65 x 45 mm (7.7 x 2.6 x 1.8 inch)
Microphone net weight: 652 g (23 oz)
PSU dimensions: 240 x 170 x 47 mm (9.4 x 6.7 x 1.9 inch)
PSU weight: 2381 g (68 oz)
Remote dimensions: 240 x 163 x 52 mm (9.4 x 6.4 x 2 in)
Remote weight: 1952 g (69 oz)