Gear Hunter

Darkglass - DG-ADAM

Description

The Aggressively Distorting Advanced Machine is the result of a collaboration with one of the most celebrated artists in today's metal scene - Adam "Nolly" Getgood. This pedal captures Nolly's entire tonal arsenal meticulously refined by years of in-depth testing and experience in one striking enclosure.

The Aggressively Distorting Advanced Machine has three fully programmable rotating footswitch presets. Each of these stores your unique blend of compression, distortion, impulse responses, EQ parameters, and signal chain settings. Featuring a unique and innovative top-notch precision touch slider interface, for its 6-band programmable EQ.

It also incorporates a USB-C audio interface and balanced stereo outputs for studio monitors and is equipped with an extra accurate chromatic tuner, that also works well with down-tuned guitars and basses.

Features
* Compression - Controls the amount of input gain to the compressor and intelligently applies the correct amount of makeup gain so that your signal is always driven at the appropriate level, no matter how much compression is applied.
* Drive - Adds distortion and drive to your signal. Crank this knob to apply Nolly's favorite vintage distortion to the distorted part of the signal chain.
* Character - Changes the tone of the distortion, adding brightness to the distortion signal.
* Blend - Mixes between the distortion signal and the clean sidechain signal.
* Level - Controls the master volume of Aggressively Distorting Advanced Machine.
* Touch Sensitive Sliders - Each slider has a -12 dB to 12 dB range. From left to right, the frequency bands for each slider correspond to a low shelf, 250 Hz, 500 Hz, 1.5 kHz, 3 kHz, and a high shelf.

Inputs
- 1/4" Mono Jack
- AUX Input
- Headphone Output
- MIDI In
- USB Port

Dimension: 18 x 12 x 6 cm
Weight: 0.7 kg