Gear Hunter

Artificial Blonde Vibrato Pedal - JHS

Description

Discover the newest member of the JHS range and Madison Cunningham's signature pedal: the Artificial Blonde.

In short, the Artificial Blonde is a very simple take on Madison's signature sound: a constantly active pitch vibrato with a slight depth. The secondary footswitch lets you switch between two preset speed and depth settings. It's a true pitch vibrato modulation pedal, with two easily accessible modes for live use. Essentially, it's Madison Cunningham in pedal form: just add a clean Fender amp and tune your guitar down!

Commands:

VOLUME - Controls the overall volume of the pedal. Left is less, right is more.

EQ - The EQ control is an active toggle equalizer. At noon, the response is flat. Turning it to the left boosts the bass and attenuates the treble, while turning it to the right boosts the treble and attenuates the bass.

SPEED - Controls the speed of the vibrato. Left: slower, right: faster.

DEPTH - Controls the depth of the vibrato. To the left, less vibrato; to the right, more vibrato.

INPUT - The 1/4" jack socket at the top right receives the signal from your instrument.

MONO/STEREO OUTPUT 6.35 mm jack outputs. Use the MONO output for a mono signal or use both the MONO and STEREO outputs for 3D stereo sound.

BYPASS - The left pedal activates or deactivates the effect. When deactivated, the pedal is in buffered bypass mode and both outputs allow the original signal to pass through.

PRESET The right foot pedal allows you to switch between presets A and B. When powered on, the default preset is B. Each preset has the same speed and depth range and allows you to create two different switchable settings.


This pedal requires a standard 9V DC center negative power supply, draws less than 138mA and measures 4.7" x 3.5" x 1.5".