Opens in a new window
Yorkville Sound Étui rigide en forme de goutte d'eau pour guitare électrique
Photos additionnelles :
Les étuis de guitare Yorkville sont construits pour résister à la route. Construction robuste en bois lamellé-collé croisé à 5 plis. Revêtement en vinyle épais, doublure intérieure en peluche, quincaillerie robuste, grands compartiments pour accessoires et attaches de verrouillage assurent une fiabilité à toute épreuve sur le long terme. Disponible pour pratiquement toutes les formes et tous les styles de guitares électriques et acoustiques, de basses et d'instruments à cordes.
Caractéristiques :
- Construction en bois stratifié croisé à cinq plis
- Revêtement en vinyle ultra-robuste
- Doublure intérieure en peluche
- Grands compartiments pour accessoires
- Poignées moulées ultra-robustes
- Toutes les fixations métalliques
Spécifications :
- Instrument : Guitare électrique
- Longueur : 41.50 pouces (105.41 cm)
- Lower Bout : 14,50 pouces (36,83 cm)
- Upper Bout : 11,50 pouces (29,21 cm)
- Profondeur : 3,75 pouces (9,53 cm)
- Poignée : Plastique
- Dessus voûté : Non
Caractéristiques :
- Construction en bois stratifié croisé à cinq plis
- Revêtement en vinyle ultra-robuste
- Doublure intérieure en peluche
- Grands compartiments pour accessoires
- Poignées moulées ultra-robustes
- Toutes les fixations métalliques
Spécifications :
- Instrument : Guitare électrique
- Longueur : 41.50 pouces (105.41 cm)
- Lower Bout : 14,50 pouces (36,83 cm)
- Upper Bout : 11,50 pouces (29,21 cm)
- Profondeur : 3,75 pouces (9,53 cm)
- Poignée : Plastique
- Dessus voûté : Non
Q et R
Question: Will this fit an Ibanez GRG121DX?
- demandé le Dec 5, 2023
- demandé le Dec 5, 2023
Question: Will this fit a Yamaha SLG Silent Guitar?
- demandé le Dec 20, 2023
- demandé le Dec 20, 2023
Répondre: No, the SLG series is to wide for this case.
- répondu par Ron Elliott, Vancouver, Colombie-Britannique
- répondu par Ron Elliott, Vancouver, Colombie-Britannique
Question: Can I fit a Gretsch G5230T Jet Electromatic (w/Bigsby vibrato tail piece)?
- demandé le Jan 30, 2024
- demandé le Jan 30, 2024
Question: Will this fit a Fender Telecaster?
- demandé le Mar 9, 2024
- demandé le Mar 9, 2024
Question: Will the tear drop case fit a Jackson JS22 Dinky?
- demandé le Mar 29, 2024
- demandé le Mar 29, 2024
Question: What are the external dimensions (length, width, depth) of this case at the widest points?
- demandé le Apr 1, 2024
- demandé le Apr 1, 2024
Répondre: Total case Length: 41.50 inches (105.41 cm)
• Lower Bout: 14.50 inches (36.83 cm)
• Depth: 3.75 inches (9.53 cm)
- répondu par David Callender, Toronto (Bloor St.), Ontario
• Lower Bout: 14.50 inches (36.83 cm)
• Depth: 3.75 inches (9.53 cm)
- répondu par David Callender, Toronto (Bloor St.), Ontario
Question: Will this fit an Epiphone Les Paul Classic guitar?
- demandé le Apr 27, 2024
- demandé le Apr 27, 2024
Répondre: It will not be a snug fit.
Search YEC-6HLP. This is a Les Paul case.
- répondu par Nicolas Jacques
Search YEC-6HLP. This is a Les Paul case.
- répondu par Nicolas Jacques
Question: Will this fit a Godin SDXT?
- demandé le May 6, 2024
- demandé le May 6, 2024
Avis
18.223.28.70
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
They Smell Oddly Good 0 personne sur 0 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Bedford, Nova Scotia
This is kind of a wierd pleasure but these Yorkville cases actually smell really good.
Almost nostalgic in a sense.
Otherwise, I own two of these cases, one for each of my superstrats.
One is a Jackson Soloist, the other is a Charvel Pro-Mod.
They fit perfectly in the case, and the case fits width-wise well enough that I have two lined up inside my closet with enough room for one more (plus a Yorkville bass case and Yamaha acoustic soft shell case.)
It's great value and I love toting them around - makes me feel like a rock star.
Posted by Joshua Richard on Jan 29, 2024
good case 1 personne sur 1 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Ottawa, Ontario
I use this cases for my DIY guitars, they fit purfect for all my teles and strats.
Posted by Jim on Mar 6, 2023
Great Case 0 personne sur 0 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Burlington, Ontario
I've bought a few of these cases over the years for custom guitars I've built. They're great cases and my customers really appreciate getting a great case for their custom built guitar.
Posted by John on Feb 8, 2023
Perfect Fit for a Gretsch G2210, G2215, G2217 ... 1 personne sur 2 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Burlington, Ontario
Very nice case -- has 3 hinges & 4 latches with decent padding. Large storage compartment. It's a perfect fit for my Gretsch G2217 FSR. Saved me about $135 in lieu of buying the $250 Gretsch case.
*Will not fit the above 3 models if you add an optional Bigsby tailpiece.*
Case is made in Canada.
*Will not fit the above 3 models if you add an optional Bigsby tailpiece.*
Case is made in Canada.
Posted by Nick on Dec 13, 2022
Lost and found 2 personnes sur 2 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Ottawa, Ontario
Fits my vintage Les Paul copy great. Flew with it last month. The airline lost my guitar (it got left behind on a layover in Toronto), but they eventually found it, flew it to the correct city (Ottawa) and hand delivered it right to my apartment door - undamaged.
Posted by Frank on Sep 9, 2022
Good case for a Gretsch 5230 0 personne sur 0 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Laval, Quebec
Great alternative to an expensive original Gretsch guitar hard case. My G5230LH (no Bigsby) fits like a snug glove. The case is just a half inch too small height wise but the inside cushioning adjusts over time. If this case came in an archtop version it would be idea.
Posted by Mike on May 28, 2022
RG550 1 personne sur 1 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Surrey, British Columbia
I have one for ny Ibanez RG550. Fits nicely and is considerably less expensive than the Ibanez case.I wouldn't trust it for flying but that is just being a bit paranoid. I do have the Ibanez case so I do have that option.
Posted by Alfred on Nov 12, 2021
Great case 9 personnes sur 9 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Guelph, Ontario
I own a Squier Affinity Strat, Affinity Tele, and a Squier ‘51. I wanted a decent case that wasn’t expensive, that could accommodate all 3. Staff at the Guelph branch recommended this case so I bought it. I fit the guitars into it and noticed the necks were always angled upward in the case. It may have been fine but it just bugged me. After thinking this over I remembered Affinity series are not full thickness bodies and this was probly the reason the guitars were not sitting properly. I had a 10x8 piece of rigid styrofoam about a half inch thick kicking around so I threw it in the case under the body, and it was exactly what it needed. These guitars fit like a glove now.
In conclusion I think this case is made for legit Fender Strats and Teles (with the full thickness body), but all you need is a half inch thick spacer under the body for Affinity’s to level everything out. It is such a good guitar case for $95. Extremely happy with my purchase and I eventually will get 2 more so I have 1 for each guitar. Great product!
Posted by Randy on Jan 5, 2021
Great case, not for Tele 1 personne sur 3 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Brampton, Ontario
Got this case as a jam-friendly one, keeping the fancy at home. Surprisingly, I later noticed that the Tele’s neck does not sit straight in the case’s neck holding area. There is (roughly) a 20 degrees angle of difference between where the neck’s base sits in the case and the other holder. So, the higher area on the guitar neck is literally floating inside the case. Worried about this case falling with a guitar inside.
Posted by anonymous on May 16, 2019
Does the job 0 personne sur 0 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Edmonton North, Alberta
I picked this over the rectangular case which I thought had too much room. I read too many reviews about Strats bumping around in those and I needed a more snug case for an Ibanez Joe Satriani guitar that I bought years ago used without a case. I saw Ibanez cases and they were heavy and overpriced so I went with this one as it is better value.
Posted by David on Feb 25, 2018
Yorkville Sound Teardrop 2 personnes sur 2 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale North York (Steeles), Ontario
I received this as a gift and I quickly transferred my Gibson SG Standard to this case because the original Gibson case has an aluminum ridge around the entire perimeter top and bottom, that can very easily damage the guitar if it comes in slight contact with it. This case is FAR more protective of the contents than the Gibson case. I am quite surprised that this was overlooked by Gibson. Great product with thought of protecting your investment at a good price too.
Posted by stan on Dec 30, 2016
Fits Danelectro 12 String or Strat 1 personne sur 1 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Toronto (Bloor St.), Ontario
Bought this case to hold my Danelectro semi-hollow 12-string. Fits almost like it was made for it. Also seems to be a good fit for my Highway 1 Strat. Pretty decent case, good value for the price.
Posted by Guillaume on Jan 2, 2015
It Fits ESP KH602 2 personnes sur 2 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Port Coquitlam, British Columbia
I bought it to fit my KH-602. My guitar fits snugly with no slop. I usually keep my gits and cases stored upright, or racked; and then stowed flat when hitting gigs. While I wouldnt pile amps on top of this thing, for top-loading your guitar and protecting it from scuffs, scratches, snapped or bent necks etc., this is a good solution. Its not on par with an SKB or Gator. But its good value and will protect your git.
Posted by SB on Mar 7, 2013
Yorkville soind tear drop case 13 personnes sur 16 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Halifax, Nova Scotia
While having a latch on my skb case fixed, I picked this up as temp storage for the LP. I fell down a hill while on my way to jam. Trying to save the guitar I threw it down the hill when my ankle screamed sprain and unfortunately on the ashpalt in my way is where it bounced to. After saving the guitar on the horrible trip,it took the weight and force of me landing on it when I finished my trip down. Short and curlys LP fine,the case... dinged,torn colapsed back panel. Total cost buying another Made in Canada Yorkville Sound case under $100, old case was fixed up and carries an ltd for a friend. Did I mention the LP was fine
Posted by Reid on Jan 1, 2013
Solid case, great price! 2 personnes sur 2 ont trouvé cet avis pertinent
Caractéristiques
Qualité
Valeur
Évaluation globale
Relation au produit I own it
Succursale Port Coquitlam, British Columbia
Good solid case for the price. Protected my tele when the rear seat in my hatch back came crashing down in a emergency stop. Decent storage area.
Posted by anonymous on Apr 6, 2012
Complétez votre achat
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| Étui rigide en forme de goutte d'eau pour guitare électrique | 37473 |
