Departments > Pro Audio & Recording > Studio Monitors > Reference Monitors - Active > ATC Loudspeakers > SCS70iW Pro In-Wall Active Subwoofer - 12''

ATC Loudspeakers

SCS70iW Pro In-Wall Active Subwoofer - 12''

SKU: # 775191   |   Model: # ATC-SCS70IWPRO   |    Product Reviews0 Reviews  Write a Review

SCS70iW Pro In-Wall Active Subwoofer - 12\'\'

Additional Photos:

SCS70iW Pro In-Wall Active Subwoofer - 12\'\'
SCS70iW Pro In-Wall Active Subwoofer - 12\'\'
SCS70iW Pro In-Wall Active Subwoofer - 12\'\'
Your Price: $6,899.00 CDN
or from $319 CDN/mo

Buy Online

 Add to Cart

Buy In-Store

The ATC SCS70iW Pro is a 12" (300mm) active subwoofer, designed to be mounted in-wall (flush mount). It is the ideal partner to in-wall mounted mid-size ATC monitors in stereo, multi-channel, and immersive audio applications.

Features
• In-Wall (flush mount) cabinet design with reduced depth and remote mounted amplifier
• ATC hand-built high-excursion 12" (300mm) SS75-314SC subwoofer driver
• R1-300 7U/19" remote rack mount amplifier
• Amp - Sub connection via NL4 speaker and 5-pin XLR LED cable
• Stereo balanced inputs and stereo "Link" balanced outputs
• Level, Low-Pass Frequency and Phase user controls
• Remote muting via footswitch
• Hand-built in England and covered by a 6 year warranty

Specifications
Acoustic/Subwoofer Specifications
Drive Unit - Bass: 1 x SS75-314SC 8Ω
Low Frequency Cut-off: 22Hz (-6dB, half space, low pass filter set at 80Hz)
Low Pass Filters: 50Hz, 65Hz, 80Hz, 320Hz. (-6dB, 4th order Linkwitz Riley)
MaxSPL: 110dB continuous, 116dB peak (IEC Weighted Pink Noise, 1m, half space, low pass filter @ 80Hz)
Sensitivity: +4dBu ref 88dBC (single channel driven, Gain +6dB, Level 0dB, pink noise, low pass filter @ 80Hz)
Speaker Level Input: 1 x Rear Panel Mounted Neutrik NL4
Power/Clip & Mute LEDs Input: 1 x Rear Panel Mounted 5-Pin Female XLR

Electronic Specifications R1-300 (Remote Amp)
Amplifier type: Grounded Source MOSFET based Class A-B, convection cooled
Output Power: 300W in to 8Ω
THD+N: 0.003%/-90dB, at 100Hz, 300W into 8Ω over 90kHz bandwidth
Balanced Inputs: 2 x Front Panel Mounted Female XLR, pin 2 hot
Balanced Outputs: 2 x Front Panel Mounted Male XLR, pin 2 hot
Frequency Response: 2Hz (-3dB) - 320Hz (-6dB, set by panel-controlled LP filter)
Low Pass Filters: 4th Order Linkwitz Riley
Gain Control: 0, +6dB, +10dB
Level Control: 0dB -11dB in 1dB steps. Total range 21dB with use of Gain switch
Phase Control: 0-180° ref. Input
Polarity Control: In-phase/Out-of-phase ref. Input
Speaker Level Output: 1 x Rear Panel Mounted Neutrik NL4
Power/Clip & Mute LEDs Output: 1 x Rear Panel Mounted 5-Pin Female XLR
Power Consumption: Idle 8W/14VA. 1/8th Power 170W/230VA. Full Power 500W/600VA

Physical Specifications - Subwoofer
Dimensions: 568 x 464 x 450mm (22 5/16 x 18 1/4 x 17 11/16")
Net Weight: 44 kg (97 lbs)

Physical Specifications - Amp
Dimensions: 7U x 19" (rack mount). Depth 133mm (5 1/4")
Net Weight: 12 kg (26.4 lbs)

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions