SPL

Passive EQ w/120V Rail Gain

SKU: # 418977   |   Model: # PASSEQ   |    Product Reviews0 Reviews  Write a Review

Passive EQ w/120V Rail Gain

Additional Photos:

Passive EQ w/120V Rail Gain
 This product is no longer available.
The most powerful passive EQ ever made. The Passeq is a neo-classic design with separate passive hi, mid and low boost & cut filters with 120V rail gain make-up stages and Lundahl I/O transformers. The musical character and rich sound of passive filters built with selected components fulfill the highest sound expectations in recording, mixing and mastering.

FEATURES

• The most powerful passive EQ ever made144 (!) passive filters (72 per channel) in one EQ.
• Individual coils per filter.
• Single core coils, which means that every one is wound individually on its own dedicated core. This excludes sonic degradation from mutual influences while at the same time improving THD values.
• 120V makeup amplifiers based upon SPL unique SUPRA-OPs with 150dB dynamic rage and 200 v/ms slew rate
• Individual design and component specificity for each filter.
• Custom made coils for critical mid-frequency ranges.
• Boost and cut crossovers mesh perfectly so that with the high number of frequencies one can dependably command the most elaborate set of response curves that to date any passive EQ has offered.
• Transformers from Lundahl with perfectly matched sonic characteristics provide for balanced I/O stages.
• XLR contacts from Switchcraft.
• Switches and potentiometers from Elma and ALPS (including ALPS Big Blue with 41 steps).
• Internal, linear power supply featuring a generously proportioned toroidal transformer and voltage selection (110-120V, 60Hz or 220-240V, 50Hz).

SPECIFICATIONS

• Inputs and Outputs: Instrumentation amplifier, transformer balanced
• Nominal Input Level: +4 dBu
• Input Impedance: =22 kOhm
• Output Impedance: 600 Ohm
• Max. Input Level: +28 dBu
• Max. Output Level: +32 dBu
• Frequency Range: 20 Hz-50 kHz linear, 50 kHz-100 kHz: -3 dB
• CMRR 70 dBu (@ 1 kHz)
• THD & N (@ 0 dBu Input Level) -110 dBu
• S/N A-weighted -115 dBu
• Crosstalk L/R (@ 1 kHz) -85 dBu
• Dynamic Range: 143 dB
• Power Supply: Toroidal Transformer 48 VA, Voltage Selector 230/50 Hz 115 V/60 Hz
• Fuses 500 mA @ 230 V, 1 A @ 115 V
• Power Consumption 40 W
• Dimensions: Standard EIA 19 Inch Housing/4U 482 x 176 x 390 mm /ca. 19 x 7 x 15.6 inches
• Weight 11,8 kg /25.96 lb
• Notes: 0 dBu = 0,775 V

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.