Maxon

Super Metal Distortion

SKU: # 319069   |   Model: # SM-9 PRO+   |    Product Reviews1 Reviews  Write a Review

Super Metal Distortion
 This product is no longer available.
Over the past 10 years Maxon effects have become key ingredients in the guitar rigs of countless metal bands.
The irony here (pun intended) is that Maxon has never offered a pedal tailored to the needs of the metal guitarist until now. Introducing the Maxon SM-9 Pro+ Super Metal specifically designed for high-gain distortion tones, the SM-9s flexible saturation circuit can churn out everything from classic crunch through to the throaty chunk of todays drop-tuned metal extremes.

Developing such a pedal was no easy task, and the Pro+ was on the drawing board for years before Maxon felt it was ready for release. Several unique tricks were incorporated into its design to create a pedal that is as versatile as it is merciless. Forgoing the use of conventional tone controls, the SM-9 instead features Scoop and Edge knobs to dial in the riffage. The Scoop control is a mid-band elimination filter with a range from 200 Hz 2 KHz. This control adjusts the frequency range where the pedals midrange cut is centered. Once the amount of mid scoop is determined, any high-end loss can be dialed back in using the Edge control - a Hi-cut shelving filter continuously variable between 2-15 kHz. These two controls are highly interactive and work much like a parametric equalizer Adjusting both knobs simultaneously allows the user to find the perfect mix of brutality and clarity. The SM-9s Gain control adjusts the degree of saturation the pedal provides. This control is actually a dual-ganged pot that increases the amount of distortion while simultaneously boosting the upper midrange band up to 20 dB at 1 kHz. By boosting and cutting specific frequency bands in relation to Gain, the SM-9s controls allow the user to sculpt brutal, beefy guitar tones that retain note clarity and definition. The Pro+ also offers switchable 9- or 18-volt operation. In Classic mode, the SM-9 runs at the incoming 9 volts DC, greatly extending battery life. Switching to stabilized 18-volt operation increases headroom, frequency range, and dynamic response of the pedal. Using the SM-9s controls and voltage options, an almost unlimited variety of monstrous high-gain tones can be dialed in. Whether youre a full-time metal maniac or just need the occasional nuclear blast without the bulk or volume of a full stack, the Maxon SM-9 Pro + Super Metal will deliver the goods.

Q & A


There are currently no questions for this product.

Reviews


18.118.12.222
Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; [email protected])
SM9Pro + Super Metal 0 of 0 customers found this review helpful
Features  
Quality  
Value  
Overall  
Product Experience   I own it
Closest Store   Victoria, British Columbia
What impressed me the most was all the trouble the good people at L&M went through to find me one of these dinosaurs. I do believe this was the last new one in existence. Thanks for hunting it down, and reeling it in for me. I know it was a big pain in the nether region... L&M rocks! So does the little blue box. I set everything to eleven - except the volume knob.
Posted by Kevin on Jan 18, 2022
Was this review helpful? Vote helpful Vote not helpful flag this review

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.