Moog 500 Series Ladder Filter

SKU: # 370604   |   Model: # LADDER FILTER   |    Product Reviews0 Reviews  Write a Review

500 Series Ladder Filter

Additional Photos:

500 Series Ladder Filter
 This product is no longer available.
The Ladder is a Dynamic Transistor Ladder Filter that is based on Bob Moog's original ladder filter designs. Don't be fooled by its small size, The Ladder is a powerful and fantastic sound sculpting tool that allows for creative and unique sound shifting and shaping. By design, The Ladder sports the smoothest all analog Low Pass and High Pass filter section. Simply adjust the Cutoff knob to add vibe, warmth or tonal adjustment. Choose LP to add analog vibe and warmth to a sound or select HP for sweetening and relieving the heft of a sound.

The Envelope section of The Ladder is where things get really cool:

• Variable Attack and Release controls allow you to perfectly dial in the behavior of The Ladder's envelope section. Use these controls to open and close the envelope as fast as lightning, or slow as molasses.

• Use the Amount control in Positive or Negative mode for mild to extreme sound shaping and manipulation. From slight timbral excitement and voicing to extreme compression-like behavior. Even reversed filter action is achievable!

• The Resonance control used with The Ladders other features allows for the creation of sweet, dynamic and even speech like behavior. Use it to tune The Ladder to a sound source or not. You can excite or accentuate specific frequencies as well as create completely new unique and wild sounds.

NOTE: The Ladder's Resonance control will push the unit into self-oscillation. This can be used for effect if desired.

The 2Pole/4Pole switch allows you to select how aggressive your filter slope is. 2 pole is equal to 12db per octave which is smooth and sweet, while 4 pole is 24db per octave which is hard and aggressive.

You also have a hard wire Bypass for totally transparent routing and A/B comparison

The Ladder isn't your average filter. It's a big step up!


SPECIFICATIONS
Audio I/O: Balanced line level via 500 rack. +19dB to -16dB input accepted.
Filter Type: 2 and 4 pole dynamic low-pass & high-pass transistor Ladder Filter
Envelope Type: RMS detector, bi-polar with variable attack & release
Attack time: Better than 250S to 2.0 seconds depending on program material and level.
Release time: Better than 150mS to 2.0S depending on program material and level.
Envelope Control: Positive and Negative Modulation
Input Impedance: Nominally 24KΩ balanced differential, 12KΩ unbalanced single ended.
Output Impedance: Nominally 50Ω differential 25Ω single ended.
Max. Output Level: Better than +22dB, balanced.
Drive Gain: 36dB Range of control
Output Gain: 36dB Range of control
Frequency Response: Better than +/-0.5dB 20Hz 20KHz pass band. Better than +/- 1.5dB 5Hz 24KHz pass band.
Bypass: Hard Relay True Bypass
Power Consumption: Less than 105mA +16V, less than 75mA -16V.

Q & A


There are currently no questions for this product.

Reviews


There are currently no reviews for this product. Be the first to write one!

Performance Warranty Banner

Protect your investment with the Long & McQuade Performance Warranty

A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.

Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.

How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
  • Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
  • Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
  • No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
  • Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
  • Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
  • Loaners Available: A loaner product may be given while the product is being repaired.
  • Power Surge Protection: Your product is covered even if damaged from a power surge.
  • Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
  • Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
 

Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.

Purchasing additional years of coverage

Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.

If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:

  • NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
  • USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
  • GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
  • BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.

Great Additions