Audio-Technica
2000 Series Frequency-agile True Diversity UHF Wireless System
Additional Photos:
Offering 10 selectable channels in one of two UHF frequency ranges and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series' 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica's Tone Lock squelch plus an easy-to-read LCD information display.
Features:
• Serious advances in affordable professional wireless
• Clear sound quality and rock-solid, dependable performance
• Automatic frequency scanning
• 10 compatible user-switchable channels in one of two UHF frequency ranges
• Antenna power available for powered antennas & other in-line RF devices
• True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
• Tone Lock tone squelch system fights interference
• Rugged metal half-rack receiver with soft-touch controls and LCD display
• Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
• Switchable transmitter power output with high and low settings offered
• Includes rack-mount kit and detachable UHF antennas
• Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
• ATW-CHG2 charger available for ATW-T220a & ATW-T210a transmitters
Third-generation 2000 Series ("b" version) components:
- ATW-R2100b receiver
- ATW-T210a UniPak body-pack transmitter
*Cable not included
Specifications:
OVERALL SYSTEM SPECS
Operating Frequencies: UHF
Band D: 656.125 to 678.500 MHz
Number of Channels: 10 total
Modulation Mode: FM
Maximum Deviation: 40 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion: < 1% (at 1 kHz, 20 kHz deviation)
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: 5 degC to 45 degC; 41 degF to 113 degF
Frequency Response: 100 Hz to 15 kHz (+1 dB, -3 dB)
RECEIVER SPECIFICATIONS
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
(50 ohms termination)
Antenna Input: BNC-type, 50 ohms
Bias voltage: 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions (not including BNC connectors or feet): 210.0 mm (8.27") W x 162.2 mm (6.39") D x 44.0 mm (1.73") H
Net Weight: 1.0 kg (35.3 oz), without accessories
Accessories Included: Two flexible UHF antennas; rack-mount adapters
ADDITIONAL RECEIVER SPECS
Maximum Output Level: XLR, balanced: +9 dBV ; 1/4" (6.3 mm), unbalanced: +4 dBV
Balanced Audio Output Attenuator: Two position switch: 0 / -12 dB
BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output
High: 30 mW,
Low: 10 mW (switchable), at 50 ohms
Input Connections: Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V
Batteries: Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
Recharging power for NiMH batteries (with ATW-CHG2):
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Battery Life (Depending on battery type and use pattern)
High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Dimension: 66.0 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H
Net Weight: 81 g (2.9 oz), without batteries
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| 2000 Series Frequency-agile True Diversity UHF Wireless System | 488447 |
