Waves
DiGiGrid DLS All-In-One Pro Tools to SoundGrid Processing and Networking Hub
Additional Photos:
DLS works in one of two modes, I/O and SGP:
• In I/O mode, the DLS is designed to act as a bridge between Pro Tools systems and the DLS's built-in DSP server. In this mode, the HD/HDX or HD Native system remains your playback engine, while the DLS appears as individual I/O units from which you can expand your studio by offloading your plugin processing to the built-in server and by connecting to additional SoundGrid I/Os.
• In SGP mode, the DLS enables you to control a variety of DigiLink enabled I/Os, bridge your favorite DAW (Logic, Cubase, Nuendo, Ableton, Pro Tools Native, etc.) with SoundGrid applications and ASIO/Core Audio drivers, and offload your plugin processing to the built-in DSP server.
In both modes, you can connect additional SoundGrid-compatible components to your system with a single Cat 5e/Cat 6 Ethernet cable.
DiGiGrid DLS comes with the complete SoundGrid Studio System software (the SoundGrid Studio Application, StudioRack, and the eMotion ST mixer). Used in combination with this software, the DLS, with its built-in SoundGrid server, gives you unequaled processing power. With full plugin integration inside your DAW, the DLS enables you to monitor and mix using up to hundreds of SoundGrid-compatible Waves and third-party plugins in real time, with super-low latency of only 0.8 milliseconds.
Features:
• Built-in SoundGrid DSP server and network switch
• Dual DigiLink ports providing up to 64 digital inputs/outputs
• Bridges Pro Tools HD/HDX and HD Native systems with SoundGrid
• Enables convenient and seamless use of a variety of DigiLink-compliant I/O devices with any native DAW
• Compliant with the SoundGrid ASIO/Core Audio driver
• Compatible with MultiRack
• Connects via a single Ethernet cable (Cat 5e/Cat 6)
Specifications:
• Internal SoundGrid DSP server (SoundGrid Server One equivalent)
• 2 DigiLink ports; 64 channels in either SGP or I/O mode (32 channels per port).
• I/O mode: DLS acts as an interface connected to HD Core, HD Accel, HDX or HD Native cards; supports Pro Tools TDM 10.x and 11.x
• SGP mode: DLS acts as a controller for DigiLink-enabled I/Os 2 operation mode switches
• Compatible with the following DigiLink-enabled I/Os: Digidesign 192, Digidesign 96 (Digidesign 96i not supported), Avid HD Omni, Avid HD I/O, Apogee Symphony Marks I and II, Lynx Aurora 8, Lynx Aurora 16.
• 2 SoundGrid RJ45 Ethernet ports
1 AC input
1 Word Clock/Loop Sync I/O
1 USB port
• 2U rackmount
• Supported sample rates: 44.1, 48, 88.2 and 96 kHz (176.4 and 192 kHz will be supported in the future)
• Recovery switch
• Clocking options: Word Clock/Loop Sync, SoundGrid (Sync over Ethernet) or DigiLink
• Width: 48.26 cm / 19 inches
• Height: 8.81 cm / 2U
• Depth: 35.6 cm / 14.01 inches
• Device Weight: 5 kg / 11 lbs
• Package Contents: DiGiGrid DLS unit, Power cord: 1 US, 1 EU, 1 UK, Ethernet cable: Cat 5e (2 meters), Registration card
Q & A
Reviews
Protect your investment with the Long & McQuade Performance Warranty
A warranty can be a very important factor when making a buying decision. Because repairs can be very expensive in terms of parts and labour costs, manufacturers usually only provide one year limited warranties that generally only cover items that malfunction due to a manufacturer’s defect. With an important purchase such as a musical
instrument or piece of studio gear, however, many people want to have the peace of mind in knowing that their investment will be protected should the product no longer be performing at 100%.
Because of this, Long & McQuade provides our customers with a FREE one-year Performance Warranty on most of our products. The Long & McQuade Performance Warranty supplements the manufacturer’s warranty to ensure that our customers receive complete “no hassle” warranty coverage within their first year.
How does the Long & McQuade Performance Warranty differ from most manufacturers' warranties?
- Performance Guarantee: Normal wear and tear is covered, so your product will be performing as well as the day you purchased it for the entire duration of the coverage. Band and Orchestral Performance Warranty does not include replacing pads or cleaning for woodwind instruments, unless deemed necessary by our repair staff. Ultrasonic cleaning for brass instruments will be provided if deemed necessary by our repair staff, but is not routinely offered under the Performance Warranty.
- Product Replacement: If your product cannot be fixed or costs too much to fix, we will replace it with the equivalent model for no additional charge. If this is not possible, a full refund will be provided.
- No Lemon Policy: Your product will be replaced should the same problem occur multiple times.
- Convenient: Easy drop off and pick up of the product at any Long & McQuade location.
- Guitar Setup: Guitars purchased at Long & McQuade come with 1 free setup, to be redeemed within 1 year for new guitars and 90 days for used guitars.
- Loaners Available: A loaner product may be given while the product is being repaired.
- Power Surge Protection: Your product is covered even if damaged from a power surge.
- Accessory Coverage: Any peripheral devices or accessories that come with your product (i.e. foot pedal, case) are also covered.
- Commercial Use Coverage: Music and recording professionals who purchase gear for “heavy-use” commercial purposes will still be covered.
Long & McQuade reserves the right to restrict the purchase of additional years of Performance Warranty. Used products come with a 3-month Long & McQuade Performance Warranty. Some products (i.e. computers, software, cymbals and other items) are covered only by the manufacturer‘s warranty. Consumables (i.e. strings, reeds, drum sticks, batteries, tubes, cross faders) are excluded as they are designed to be replaced. Cosmetic Damage, Accidental Damage, or problems caused by Humidity or Temperature Issues are not covered. Speakers damaged by overpowering are generally not covered. Our coverage does not provide compensation for loss of use. As of June 2018 the Performance Warranty is no longer transferable. The warranty is only valid in Canada.
Purchasing additional years of coverage
Some manufacturers provide warranties for longer than 1 year; however, these are usually limited warranties that do not provide the same coverage as the Long & McQuade Performance Warranty. Customers interested in more complete and convenient (but not necessarily longer) coverage are still able to purchase additional years of the Performance Warranty.
If you are interested in receiving this coverage for longer than one year, you have the option of purchasing additional years of the Performance Warranty. The pricing is as follows:
- NEW products: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
- USED products: 4% of the current new selling price to increase the warranty from 3 months to 1 year. 4% for each additional year.
- GUITARS: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year. $45 maximum. An additional free setup is not included with additional purchased years of Performance Warranty.
- BAND and ORCHESTRAL instruments: 4% of the current new selling price to double the warranty from 1 year to 2 years. 4% for each additional year.
Great Additions
Reserve in Store
| Product | SKU | Qty |
|---|---|---|
| DiGiGrid DLS All-In-One Pro Tools to SoundGrid Processing and Networking Hub | 509440 |
