Sorry, this item is not available for purchase

Le Grand Bazar

ART Pro Audio - 8-Channel Studio A/D Input/Output Expander

UGS: 317567 Modèle: TUBEOPTO8 Numéro de série: s180677460
Quantité disponible: 1 État: Usagé

ART Pro Audio - 8-Channel Studio A/D Input/Output Expander
ART Pro Audio - 8-Channel Studio A/D Input/Output Expander 2
ART Pro Audio - 8-Channel Studio A/D Input/Output Expander 3
ART Pro Audio - 8-Channel Studio A/D Input/Output Expander 4
ART Pro Audio - 8-Channel Studio A/D Input/Output Expander 5
ART Pro Audio - 8-Channel Studio A/D Input/Output Expander 6

Achetez en magasin

 Ramassage en magasin seulement. Veuillez contacter Orleans Ontario

 Ce produit peut ne pas être livré dans son emballage d'origine


Description

The ART TubeOpto 8 is the ideal Eight Channel input / output expander for any ADAT lightpipe OPTO8equipped audio interface, direct-to-disc recorder or DAW. Eight high quality second generation discrete Class-A vacuum tube microphone preamps are packaged in a single rack space unit with eight channel 24-bit digital I/O.

Every input on the TubeOpto8 offers full control of the signal path with pad, phase and low frequency roll-off switches. Input gain and variable output level control of each channel allows up to 70dB of clean gain with incredible sonic transparency or for the tube stage to be dialed in for warming effects and soft clipping. Each channel has wide range LED meters monitor the preamp output levels while clip indicators monitor mic-preamp peak levels.

ADAT lightpipe I/O handles eight channels of 24-bit audio input and output at either 44.1 or 48 kHz sample rates. Wordclock in and thru-puts allow multiple Tubeopto8's to be synced in complex system configurations.

Features:

  • Eight fully featured Class-A tube mic preamps

  • Eight channels of ADAT lightpipe digital 24 bit audio I/O at 44.1 or 48kHz

  • Input gain and output level controls on every channel

  • Input Pad, Phase flip and Low frequency roll off switches on every channel

  • Two additional front mounted high impedance instrument line inputs

  • Eight 1/4-inch TRS balanced outputs

Specifications:

Input Impedance
* Mic: 6.4K Ohm
* Line: 0.20K Ohm
* Instrument: 2.5M Ohm

Output Impedance
* Balanced outputs: 200 Ohm balanced

Frequency Response
* Analog in to Digital out: 12Hz - 20KHz +0, -1dB @ 44.1 KHz samplerate

THD
* 1KHz: < .015% @ -30dB ref clipping
* 20-20KHz: < .033%

* HPF: 80Hz, 1-pole

Equivalent Input Noise
* Mic/Line: -130dBu, Input shorted, Max gain, A wtd.
* Instrument: -105dBu, Input shorted, Max gain, A wtd.

Maximum Input Level
* Mic/line: +18dBu balanced w/Pad
* Instrument: +15dBu
* Meter clip light: -2dB ref. A/D clip (0dB FS)

Maximum Gain
* Mic: 64dB
* Instrument: 36dB

* Maximum Output level
* Balanced: +20dBu
* Unbalanced: +14dBu
* Output level switch: Lowers Max.Output by 10dB @ -10dBV setting

* Wordclock Range: 40KHz - 52KHz

Sample Rate Settings: 44.1K Hz, 48KHz, ADAT, Wordclock
*A/D Dynamic Range: 105dB (A wtd.)
*D/A Dynamic Range: 105dB (A wtd.)
* A/D Latency: 0.667ms(48KHz), 0.725ms(44.1KHz), 32 samples
* D/A Latency: 0.458ms(48KHz), 0.500ms(44.1KHz), 22 samples

Dimensions: 1.75H x 19.0W x 14.4D (44.5mm x 482.6mm x 365.8mm)
Weight: 13.2 lbs. (6kg)

Power Requirements: USA 105-125VAC, AC 60Hz, 29Watts typical

Minimum System Requirements: ADAT interface port