Audix Flush-Mount Ceiling Microphone - White

The M70 is an innovative flush mount condenser microphone designed for distance miking. Features include a fully integrated preamp, an extremely high sensitivity rating of 38 millivolts and a small footprint of only 3 inches in diameter. The M70 applications include video conferencing, distance learning, hospital rooms, surveillance and ambient room miking.

A flush mount solution, with easy installation, allows the microphone to completely disappear from view without sacrificing sound quality. The M70 capsule is housed within a patented cradle that enables the microphone to be aimed and focused up to an angle of 45 degrees towards the sound source. In addition, the M70 has complete immunity from RF interference caused by cell phones and GSM devices.

Installation is simple, requiring just a 2 inch hole to be drilled with no additional tools. Available in white or satin nickel finish.

Applications:

- Video Conferencing
- Distance Learning
- Surveillance
- Hospital and Medical Procedures
- Ambient Room Miking

Specifications:

Transducer Type: Condenser
Frequency Response: 60 Hz - 10 kHz
Polar Pattern: Cardioid
Output Impedance: 150 ohms
Sensitivity: 38 mV / Pa @ 1k
Signal to Noise Ratio: 72 dB
Equivalent Noise Level: 22 dB
Maximum SPL: ≥ 130 dB
Dynamic Range: 108 dB
Power Requirements: 18 - 52V phantom
Connector: 3-pin Phoenix fe
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Recommended Cable: Belden 9451P or 82761 (sold separately)
Length: 176 mm / 6.9 in
Ceiling Thickness: Min. 0.4" (10 mm); Max 0.8" (21 mm)